We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green DisplayPort 2.0 cable 6.6 ft male-to-male connectors triple-shielded solid copper conductor

ESTONE

ESTONE TJ-A285 DisplayPort 2.0 cable 6.6 ft 16K@60Hz 8K@120Hz 4K@240Hz 80Gbps

SKU CH-GYZB-3WY64

A 6.6 ft DisplayPort 2.0 cable supporting 16K@60Hz, 8K@120Hz and 4K@240Hz with 80Gbps bandwidth

  • Refresh frequency16K@60 Hz, 8K@120 Hz, 4K@144 Hz, 4K@165 Hz, 2K@360 Hz
  • Rated speedTest Value
  • Cable length6.6 ft (2.01 m)
  • Connector count1
  • Source connector1 x DisplayPort2.0
  • Destination connector1 x DisplayPort2.0
  • VESA certified 80 Gbps bandwidth for stable 16K@60Hz output
  • Triple-shielded solid copper conductors prevent signal loss at high refresh rates
  • Backward compatible with DP 1.4 and 1.2 monitors and graphics cards
  • Supports 4K@240Hz and 2K@360Hz for competitive gaming smoothness
  • 6 ft male-to-male cable enables flexible single or dual-screen setups

ESTONE TJ-A285 DisplayPort 2.0 cable

The ESTONE TJ-A285 is a 6.6 ft DisplayPort 2.0 cable built for users who need 80 Gbps bandwidth and support for 16K at 60 Hz or 8K at 120 Hz. It connects a DisplayPort 2.0 source to a DisplayPort 2.0 display using male-to-male connectors. The green cable is backward compatible with DisplayPort 1.4, 1.3 and 1.2 devices, making it suitable for current high-refresh monitors and older graphics cards alike.

Sustained-load behaviour with triple shielding

Triple shielding and a solid copper conductor keep the 80 Gbps link stable during long gaming or work sessions. The cable supports Display Stream Compression 1.2a, Forward Error Correction and HDR metadata transport to maintain signal integrity at 4K 240 Hz or 2K 360 Hz without flicker or tearing. Dynamic HDR 4:4:4 and HDR 10 pass through cleanly, so colour depth does not degrade over time.

Practical limits of the DisplayPort 2.0 interface

The UHBR20-rated link tops out at 80 Gbps, which caps single-stream output at 16K 60 Hz with DSC enabled. Dual-screen configurations share that bandwidth, so each stream drops to a lower resolution or refresh rate. The 20-pin power line is disabled, eliminating a common source of handshake issues but also preventing the cable from powering active adapters. Backward compatibility covers DP 1.4, 1.3 and 1.2, yet UHBR10 and UHBR13.5 modes depend on host and monitor support.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $15.99
Typical for this category: the median of 3,804 items is $15.99.
Refresh frequency 16K@60 Hz, 8K@120 Hz, 4K@144 Hz, 4K@165 Hz, 2K@360 Hz
Typical for this category: the median of 648 items is 60 Hz.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameESTONE
Model nameTJ-A285
Product typeDisplayPort Cable
Product colorGreen
Performance
Rated speedTest Value
Display
Refresh frequency16K@60 Hz, 8K@120 Hz, 4K@144 Hz, 4K@165 Hz, 2K@360 Hz
Ports & slots
Connector count1
Source connector1 x DisplayPort2.0
Destination connector1 x DisplayPort2.0
Connector detailsDisplayPort to DisplayPort 2.0 Cable 16K@60 Hz
Connector genderMale to Male
Size & build
Overall length6.56 ft (2 m)
Cable length6.6 ft (2.01 m)
Cable shieldingTriple-shielded
Conductor typeSolid Copper Conductor
Build detailsTest123
Compatibility
Supported platformsWorks with Windows Vista

Other versions of this model

5 more in the same range

Questions about this item

Does the 6.6 ft ESTONE TJ-A285 cable generate heat or draw noticeable power during all-day 16K@60Hz use?

The cable is passive with solid copper conductors and triple shielding, so it produces no measurable heat and draws no external power during continuous 80 Gbps transmission.

What must my monitor and graphics card already provide for this DisplayPort 2.0 cable to deliver 16K@60Hz?

Both ends need native DisplayPort 2.0 ports with UHBR20 support and DSC 1.2a capability; the cable is male-to-male and requires no adapters or external power.

Will the TJ-A285 work with my older GTX 980 or Radeon R9 290 at 4K@144Hz?

Yes, the cable is backward compatible with DisplayPort 1.4 and 1.2, so it will carry 4K@144Hz HDR signals from those cards without signal loss.

More in DisplayPort Monitor Cables

Similar items