We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Jansicotek

Jansicotek BK-CD2 USB-C to DisplayPort 1.4 cable 3.3 ft 8K 60Hz 4K 144Hz 2K 240Hz 32.4Gbps HDR

SKU CH-JSNW-BDTVF

Connects a USB-C device to a DisplayPort 1.4 monitor at up to 8K 60 Hz, 4K 144 Hz or 2K 240 Hz with HDR over a 3.3 ft triple-shielded copper cable supporting Thunderbolt 3 and HBR3

  • Refresh frequency8K - 7680 × 4320@60 Hz 5K - 5120 × 2880@60 Hz 4K - 3840 × 21
  • Rated speedTest Value
  • Cable length3.3 ft (1.01 m)
  • Connector count1
  • Source connector1 x USB Type-C
  • Destination connector1 x DisplayPort 1.4
  • 8K at 60 Hz with 10-bit HDR via 32.4 Gbps bandwidth
  • 4K at 144 Hz for smooth high-refresh gaming on a 3.3 ft cable
  • 2K at 240 Hz supported through DisplayPort 1.4 DSC 1.2
  • Triple-shielded solid copper conductors reduce signal loss over the full length
  • Thunderbolt 3 and 4 compatible for direct USB-C to DisplayPort connection

USB-C to DisplayPort 1.4 cable for 8K 60 Hz output

This 3.3 ft Jansicotek BK-CD2 cable connects a USB-C source to a DisplayPort 1.4 display. It is built for users who need 8K resolution at 60 Hz with 10-bit HDR from laptops, tablets or desktops that support DisplayPort Alt Mode or Thunderbolt 3 and 4.

32.4 Gbps HBR3 bandwidth with DSC 1.2

The cable carries up to 32.4 Gbps over HBR3 and uses VESA DSC 1.2 for visually lossless 3:1 compression. That bandwidth enables 7680×4320 at 60 Hz, 3840×2160 at 144 Hz or 2560×1440 at 240 Hz with HDR10 and HDCP 2.2.

Triple-shielded copper conductors for stable signal

Male-to-male connectors and solid copper conductors reduce loss over the 3.3 ft run. It works with FreeSync and G-Sync variable refresh and supports Multi-Stream Transport for daisy-chained monitors. Buyers whose USB-C port lacks DisplayPort Alt Mode or who need longer cable runs should look elsewhere.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $15.99
Typical for this category: the median of 3,804 items is $15.99.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Model nameBK-CD2
Product typeDisplayPort Cable
Product colorBlack
Performance
Rated speedTest Value
Display
Refresh frequency8K - 7680 × 4320@60 Hz
5K - 5120 × 2880@60 Hz
4K - 3840 × 2160@144 Hz, 120 Hz, 60 Hz
2K - 2560 × 1440@240 Hz, 165 Hz, 144 Hz, 120 Hz, 60 Hz
Ports & slots
Connector count1
Source connector1 x USB Type-C
Destination connector1 x DisplayPort 1.4
Connector detailsUSB C to DisplayPort 1.4 Cable 8K@60 Hz
Connector genderMale to Male
Size & build
Overall length3.3 ft (1.01 m)
Cable length3.3 ft (1.01 m)
Cable shieldingTriple-shielded
Conductor typeSolid Copper Conductor
Build detailsTest123
Compatibility
Supported platformsWorks with Windows Vista

Other versions of this model

5 more in the same range

Questions about this item

What does 8K at 60Hz mean for my display setup?

It delivers a 7680×4320 image at 60 frames per second with 10-bit colour and HDR, provided the host and monitor both support DisplayPort 1.4 and DSC 1.2.

How does the DisplayPort 1.4 interface limit what I can run?

The link caps at 32.4 Gbps using HBR3, so 8K 60 Hz, 4K 144 Hz or 2K 240 Hz are the top native rates; higher resolutions rely on DSC 1.2 compression.

Will the 3.3 ft length and male-to-male connectors reach my monitor?

At 3.3 ft the cable suits close-range desk setups; both ends are male, plugging directly into a USB-C port with DisplayPort Alt Mode and a DisplayPort 1.4 input.

More in DisplayPort Monitor Cables

Similar items