STARTECH DP2DVI2 DisplayPort to DVI passive audio video converter 1080p 1920x1200
- 6 in (15.2 cm)
- 1x DVI-I female
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts TVI, CVI, AHD and CVBS security camera signals to HDMI at 1080p or 720p 60Hz with a BNC loop output for additional monitors
The ESTONE TVI/CVI/AHD to HDMI Converter translates analogue security camera signals from TVI, CVI, AHD or CVBS sources into a digital HDMI feed for monitors or recorders. It is intended for installers and system integrators who need to view or record coaxial camera footage on modern HDMI displays without a dedicated DVR.
A single BNC connector accepts the incoming camera signal while a second BNC loop output passes the same signal onward to another device, allowing daisy-chained monitoring. The HDMI output is selected between 720P and 1080P at 60Hz via a physical switch. Power is supplied through an included 5V/1A adapter, and the unit ships with a user manual for quick setup.
The converter draws minimal power from the external 5V supply and operates silently with no fan or moving parts. It supports coaxial cable runs of 500 to 700 metres depending on the resolution in use, maintaining image brightness, contrast and colour without active signal amplification.
Measured against everything we stock in Video Signal Converters, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | TVI/CVI/AHD to HDMI Converter |
| Ports & slots | |
| First connector | One channel CVI/TVI/AHD/CVBS BNC input |
| Second connector | One Channel CVI/TVI/AHD/CVBS BNC loop output;1x One channel HDMI output |
| In the box | |
| In the box | 1x TVI/CVI/AHD to HDMI Converter 1x 5 V/1A Power Adapter and Cable 1x 1x User Manual |
The HDMI output is fixed at 1080p or 720p at 60Hz, selectable via the switch on the unit.
You need a coaxial cable with BNC plugs for the camera input and the loop output, plus an HDMI cable for the monitor; a 5V/1A power adapter is included.
Use the physical switch on the converter to choose 1080p or 720p before powering on; the unit does not auto-switch the HDMI resolution.
More in Video Signal Converters
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?