We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Beige PLA+ filament spool in vacuum-sealed packaging

eSUN

eSUN PLA+ Filament 1.75mm 1KG Skin

SKU CH-SRQJ-1XBDJ

Beige 1.75 mm PLA+ filament on a 1 kg spool with ±0.03 mm tolerance for reliable FDM printing

  • Diameter1.75 mm
  • Product colorSkin
  • Main materialPLA
  • Compatible systemsFor All FDM 3D Printer
  • Product weight2.2 lb (1 kg)

Color Skin

Show 10 more
  • PLA+ formulation gives higher strength and toughness than standard PLA
  • Dimensional tolerance of ±0.03 mm ensures consistent feeding and stable prints
  • Tangle-free winding across 340-350 m prevents nozzle clogs and feed issues
  • Compatible with high-speed printers including Bambu Lab X1 series and Creality K1 series
  • Vacuum-sealed packaging with desiccant keeps filament dry and dust-free

1.75 mm PLA+ Filament for FDM Printers

This eSUN PLA+ spool delivers 1 kg of 1.75 mm filament in a Skin colour. The material is an enhanced PLA blend that offers higher strength and toughness than standard PLA while keeping low shrinkage and minimal warping. It is produced with a dimensional tolerance of +/- 0.03 mm and wound to avoid tangles during long prints. The vacuum-sealed pack with desiccant keeps the filament dry until use.

Makers Needing Stronger Parts Than Basic PLA

The filament suits hobbyists and professionals who want functional parts with better layer bonding and impact resistance for mechanical components, cosplay props or decorative items. It works on a wide range of FDM machines including Bambu Lab, Creality, Prusa and Ender models at speeds up to 100 mm/s. Users who require engineering-grade heat resistance, flexible TPU properties or exotic composites should look at other material families instead.

Diameter Tolerance of +/- 0.03 mm Decides Fit

A tight 0.03 mm tolerance ensures consistent extrusion and prevents nozzle clogging on direct-drive and Bowden systems alike. If your printer’s extruder cannot handle 1.75 mm stock or demands a tighter spec than 0.03 mm, this spool will not perform reliably.

How it compares

Measured against everything we stock in 3D Printer Filament, at today’s prices. Recalculated every night.

Price $18.99
Cheaper than about 75% of the 305 comparable items (median $27.99).

Specifications

Product
Brand nameeSUN
Product colorSkin
Size & build
Main materialPLA
Diameter1.75 mm
Product weight2.2 lb (1 kg)
Compatibility
Compatible systemsFor All FDM 3D Printer

Other versions of this model

5 more in the same range

Questions about this item

How do I load the 1.75 mm spool and avoid the tangle that ruins a print?

Mount the spool so filament unwinds counter-clockwise, keep the PTFE tube straight into the extruder, and never let the loose end cross under a coil — the 340-350 m length is wound tight enough to self-overlap if you release tension.

When will I need to dry or replace this Skin PLA+ reel?

Store the vacuum-sealed bag with its desiccant until use; if the filament hisses or prints with bubbles, dry at 45-60 °C for four to six hours — PLA+ does not degrade on the spool, so replacement is only needed when the 1 kg runs out.

What temperature ceiling hits first during a long, fast print on a high-speed machine?

The 230 °C nozzle limit is reached before the 60 °C bed or 100 mm/s speed ceiling, so sustained high-speed runs must stay at or below 230 °C to avoid heat creep and clogging.

More in 3D Printer Filament

Similar items