We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 1 kg spool of Very Peri PLA+ filament in vacuum-sealed packaging

eSUN

eSUN PLA+ Filament 1.75mm 1KG Very Peri

SKU CH-8D3H-NTQ7W

PLA+ filament on a 1 kg spool with ±0.03 mm tolerance and 340-350 m length prints at 210-230 °C on any FDM printer

  • Diameter1.75 mm
  • Product colorVery Peri
  • Main materialPLA
  • Compatible systemsFor All FDM 3D Printer
  • Product weight2.2 lb (1 kg)

Color Very Peri

Show 10 more
  • Stronger, tougher prints with improved PLA+ formulation
  • Consistent feeding at high speeds on popular FDM printers
  • Tangle-free 340-350 m spool prevents nozzle clogs
  • Precise ±0.03 mm diameter ensures stable, bubble-free prints
  • Vacuum-sealed packaging with desiccant keeps filament dry and dust-free

PLA+ Filament for FDM Printers

eSUN PLA+ is an enhanced polylactic acid filament supplied on a 1 kg spool with a 1.75 mm diameter. The material offers higher strength and toughness than standard PLA, low shrinkage and minimal warping for reliable indoor printing. It is compatible with most FDM 3D printers including Bambu Lab, Creality, Prusa and UltiMaker models.

Print Temperature and Speed Range

Recommended nozzle temperature sits between 210 and 230 °C with a bed temperature of 45 to 60 °C and fan speed at 100 %. The filament supports printing speeds from 40 to 100 mm/s and is validated for high-speed machines such as the Bambu Lab X1 series, Creality K1 series and AnkerMake M5. Dimensional tolerance is held to ±0.03 mm for consistent extrusion.

Upgrade from Standard PLA

The tighter tolerance and improved layer bonding make this spool suited for functional parts, cosplay props and mechanical components where basic PLA would be too brittle. Buyers who need soluble support materials, composite-filled grades or diameters other than 1.75 mm should look elsewhere. The vacuum-sealed bag with desiccant keeps the filament dry until opened.

How it compares

Measured against everything we stock in 3D Printer Filament, at today’s prices. Recalculated every night.

Price $18.99
Cheaper than about 75% of the 305 comparable items (median $27.99).

Specifications

Product
Brand nameeSUN
Product colorVery Peri
Size & build
Main materialPLA
Diameter1.75 mm
Product weight2.2 lb (1 kg)
Compatibility
Compatible systemsFor All FDM 3D Printer

Other versions of this model

5 more in the same range

Questions about this item

How do I load the 1.75mm PLA+ spool without the filament tangling on the first print?

The spool is wound with tight tolerance and good roundness; mount it so the filament unwinds counter-clockwise, keep slight tension while feeding into the extruder, and avoid letting the free end go slack — that is the step most users skip and causes overlap.

When will I need to dry or replace this 1KG reel after opening the vacuum-sealed bag?

The bag includes a desiccant and antioxidants; reseal with the desiccant after each use — if the filament later hisses, bubbles, or shows poor layer adhesion at 210-230°C, dry it at low heat before continuing, otherwise the 340-350m length lasts until fully consumed.

At what print speed does the ±0.03mm diameter tolerance start to cause under-extrusion on long runs?

The filament is tested up to 100mm/s with consistent feeding; sustained speeds above that range may reveal the tolerance limit first as slight under-extrusion or increased stringing.

More in 3D Printer Filament

Similar items