We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White braided 30 cm EPS 8-pin female to CPU 8-pin (4+4) male extension cable

EZDIY-FAB EZDPI215-3 EPS 8-Pin Female to CPU 8-Pin (4+4) Extension Cable 30 cm White

SKU CH-AVA9-XQXS5

Extends the CPU power connection by 30 cm with 16 AWG wires in a white PET-sleeved braid for clean routing

  • Refresh frequency11.8 in (30 cm)
  • Rated speedBraided
  • First connector8 Pin Eps, 8 Pin (4+4)
  • Second connector8 Pin Eps, 8 Pin (4+4)
  • Connector details[INFERRED: Power Supply]
  • Connector genderMale to Female
  • Clean routing with 16 AWG wires and PET braiding
  • Adds 30 cm reach between PSU and motherboard EPS ports
  • White sleeving matches all-white build themes
  • Male-to-female design extends existing CPU power cable
  • 12 g lightweight construction reduces strain on connectors

EPS 8-pin female to CPU 8-pin (4+4) male extension

This 30 cm white extension cable connects a power supply 8-pin EPS output to a motherboard 8-pin (4+4) EPS input. It uses 16 AWG conductors inside a PET sleeved braid for flexible routing. The cable adds 11.8 inches of reach for cleaner cable management in standard ATX builds.

Practical limits of the EPS 12V interface

The EPS 12V 8-pin connector supplies up to 12 V on four pins and ground on four pins. A 16 AWG wire set handles the typical current draw of modern desktop CPUs within the length provided. The 30 cm extension does not change the electrical specification of the ATX power delivery standard.

Installation notes and common issues

The male end plugs into the motherboard EPS header and the female end accepts the PSU EPS cable; both keyed to prevent reversal. The stiff PET sleeve can resist tight bends behind the motherboard tray. Verify the PSU cable is a true EPS 8-pin and not a PCIe 8-pin before connecting.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $20.99
Pricier than about 62% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEZDIY-FAB
Model nameEZDPI215-3
Product type[INFERRED: Power Supply]
Product colorWhite
Performance
Rated speedBraided
Display
Refresh frequency11.8 in (30 cm)
Ports & slots
First connector8 Pin Eps, 8 Pin (4+4)
Second connector8 Pin Eps, 8 Pin (4+4)
Connector details[INFERRED: Power Supply]
Connector genderMale to Female
Size & build
Cable shieldingBraided
Build detailsPET sleeved material
More details
Team affiliation1 Piece

Questions about this item

Is the 30 cm length suitable for routing behind a standard ATX motherboard tray?

At 30 cm (11.8 inches) the cable reaches from a top-mounted PSU to the CPU socket with enough slack to run behind the motherboard tray in most ATX cases.

What current can the 16 AWG conductors carry continuously?

The 16 AWG wires are rated for the full EPS 12 V specification, delivering up to 12 A per pin without voltage-drop issues on this short run.

Does the PET sleeving and braiding affect compatibility with tight clearances around the CPU socket?

The braided PET sleeve adds minimal bulk so the 8-pin (4+4) male connector seats cleanly even with large VRM heatsinks or AIO brackets.

More in Internal PSU & Riser Cables

Similar items