We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 16 AWG PCIe 8-pin female to 6+2 male extension cable 30cm

EZDIY-FAB EZDPI215-5 PCIe 8-Pin Female to 6+2 Male Extension Cable 30cm White

SKU CH-K4H7-KJ4M7

White 30 cm PCIe 8-pin female to 6+2 male extension with 16 AWG PET-sleeved wires for tidy GPU power routing

  • Refresh frequency11.8 in (30 cm)
  • First connector1x PCIe 6+2pin female
  • Second connector1x 12VHPWR PCIe Gen5 female
  • Connector detailsHDMI
  • Connector genderMale to Female
  • Product typeDisplayPort to HDMI Cable
  • 16 AWG conductors with PET sleeving for flexible routing
  • 30 cm length keeps cable runs tidy inside the case
  • PCIe 8-pin female to 6+2-pin male fits 6-pin and 8-pin GPU sockets
  • White finish matches light-themed builds
  • Weighs only .06 kg to reduce strain on connectors

30 cm PCIe power extension

This 30 cm cable extends a power supply 8-pin PCIe output to a graphics card or other PCIe device using a 6+2 pin male connector. The white PET-sleeved 16 AWG wires balance flexibility and stiffness for tidy routing inside a case. It is suited for builders who need extra reach without adding bulk.

Replaces short stock GPU leads

The extension replaces the short native cables that come with many power supplies when the GPU sits far from the PSU or behind a vertical mount. The jump is worth it when the stock length forces tight bends or visible slack that ruins a clean build aesthetic. It does not add power phases or change voltage delivery.

Fits standard ATX PSU and GPU sockets

The female end plugs into any standard 8-pin PCIe port on the supply while the 6+2 male end mates with 6-pin or 8-pin GPU inputs. The 16 AWG conductors handle typical graphics card loads and the sleeve matches other white EZDIY-FAB kits for a uniform look. Buyers who need a 12VHPWR native connector or longer runs cannot use this cable.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $20.99
Pricier than about 62% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEZDIY-FAB
Model nameEZDPI215-5
Product typeDisplayPort to HDMI Cable
Product colorWhite
Display
Refresh frequency11.8 in (30 cm)
Ports & slots
First connector1x PCIe 6+2pin female
Second connector1x 12VHPWR PCIe Gen5 female
Connector detailsHDMI
Connector genderMale to Female

Questions about this item

Will the 16 AWG PET-sleeved 30 cm cable clear my GPU backplate and motherboard 8-pin socket without strain?

The 30 cm length and 16 AWG PET sleeve give enough stiffness to route cleanly behind most backplates while reaching the motherboard 8-pin socket without tension.

Which end plugs into the PSU and which end plugs into the graphics card during installation?

Connect the PCIe 8-pin female end to the power supply 8-pin PCIe output, then plug the 6+2 pin male end into the GPU 6-pin or 8-pin socket.

If I later rebuild with a 12VHPWR graphics card, can this extension stay in the loop?

No, the male end is a PCIe 6+2 pin connector and cannot mate with a 12VHPWR socket, so a new Gen5-native cable would be required.

More in Internal PSU & Riser Cables

Similar items