STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a SFF8654 38pin Slimline SAS host port to a SFF8639 U.2 SAS or NVMe drive interface with integrated SATA 15pin power at 24Gbps
This Fervit adapter converts an SFF8654 38-pin Slimline SAS host port to an SFF8639 U.2 SAS or NVMe drive interface. It targets administrators building enterprise storage inside rackmount chassis, RAID backplanes or other high-density enclosures. The 31.49 inch length is tailored for tight internal routing.
A 32AWG low-loss copper conductor reduces attenuation and crosstalk across the link. The cable supports 24Gbps transmission and full SAS 3.1 compatibility without active cooling or external power bricks. An integrated SATA 15-pin male connector supplies drive power directly from the backplane, eliminating a separate power run.
The single assembly carries both 24Gbps data and 15-pin power, reducing cable count and improving airflow in compact bays. Builders who need to split one host port into multiple U.2 devices or who require a different connector pitch cannot use this fixed 4-lane design.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Fervit |
Connect the 38-pin Slimline SAS end to the host SFF8654 4i port, the 24Gbps SFF8639 end to the U.2 SAS or NVMe drive, and plug the SATA 15Pin male connector into the drive power socket; ensure the 31.49 inch cable routes without sharp bends.
No scheduled maintenance is required; inspect the 38-pin and 24-pin connectors for dust or bent pins during server service intervals and replace the cable if the 32AWG conductors show kinks or the latch tabs break.
The 24Gbps SAS 3.1 signalling ceiling is reached before the 32AWG copper attenuates the signal, so sustained throughput caps at the host controller's 24Gbps lane rate.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?