Monoprice Inc. 140885 Flat Cat6 Network Ethernet Cable 10 ft Black 30AWG 550MHz
- Networking Patch Ca…
- 10 ft (3.05 m)
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 5 ft Cat6 patch cable with 550 MHz bandwidth, 24 AWG bare copper conductors and gold-plated RJ45 connectors
This five-foot Cat6 patch cord uses 24 AWG stranded bare-copper conductors and a CM-rated PVC jacket to carry 550 MHz signals. Unshielded RJ45 plugs with 50-micron gold pins follow the 568B wiring code and meet ANSI/TIA-568-C.2 Category 6 standards. It is built for standard Ethernet drops up to 100 metres in offices and homes.
A moulded snagless boot protects the latch during repeated insertions while the gold-plated pins resist oxidation for reliable contact. The 5.8 mm jacket meets UL and cUL listings plus RoHS compliance, so the cable can be routed through plenum-adjacent spaces without extra sleeving.
Push each RJ45 connector into a keystone jack or NIC port until the latch clicks; the snagless boot prevents the tab from catching on adjacent cables. The only common issue is exceeding the 100-metre channel limit, which introduces errors the cable itself cannot correct.
Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | Network Ethernet Cables |
| Product color | White |
| Connectivity | |
| Cable category | 6 |
| Size & build | |
| Overall length | 5 ft (1.52 m) |
The molded snagless boot protects the 8P8C gold-plated 50U" connectors and the 5.8 mm flame-retardant PVC jacket, so normal insertions do not require scheduled replacement.
The conductor resistance is capped at 9.38 Ω per 100 m and the cable is rated to 550 MHz, so attenuation at the rated frequency is the first constraint under sustained load.
As a passive UTP patch cord it carries only signal current, so it generates no measurable heat and adds no power draw beyond the connected devices.
More in Ethernet & LAN Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?