We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black Y-splitter cable with one 8-pin female end and two 8-pin male ends

GinTai NE3401 8-Pin GPU Female to Dual PCIe 8-Pin Male 10cm

SKU CH-G3M8-M4Q81

Converts a single PSU 8-pin GPU connector into two PCIe 8-pin plugs for NVIDIA Tesla cards, using 18AWG copper wire rated to 600W

  • Refresh frequency4 in (10.2 cm)
  • Cable length4 in (10.2 cm)
  • First connectorSata
  • Second connectorSata
  • Connector details1 x eSATA to 1 x eSATA
  • Connector genderMale to Female
  • Converts one 8-pin GPU connector to dual PCIe 8-pin plugs
  • 10 cm length fits tight builds
  • 18 AWG copper core delivers up to 600 W
  • Secure latches on every connector prevent accidental disconnects
  • Designed for Tesla K80, M40, M60, P40, P100 and CMP 170HX

Power Conversion

This GinTai NE3401 cable converts a single 8-pin GPU female connector from a power supply into two 8-pin PCIe male connectors for a graphics card. It is built for NVIDIA Tesla K80, M40, M60, P40, P100 and CMP 170HX cards that require dual 8-pin power input. The 10 cm length suits compact workstation or server builds.

Installation Notes

The Y-splitter plugs directly into the PSU's existing 8-pin GPU output and the card's two 8-pin sockets with no tools required. Latches on every connector click into place to prevent accidental disconnection during transport or vibration. The wire uses 18AWG tinned copper rated for the application. Do not use this cable for CPU EPS 12V sockets; the pin-out is different and damage will occur.

Deciding Specification

The single specification that determines fit is the 600 W maximum power rating across the dual 8-pin outputs. If the target graphics card draws more than 600 W total, this splitter cannot deliver safe, stable power and a separate PSU cable per connector is required. Buyers needing higher per-connector current or CPU EPS compatibility must choose a different cable.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $20.99
Pricier than about 62% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameGinTai
Model nameNE3401
Product typeSATA
Product colorBlack
Display
Refresh frequency4 in (10.2 cm)
Ports & slots
First connectorSata
Second connectorSata
Connector details1 x eSATA to 1 x eSATA
Connector genderMale to Female
Size & build
Overall lengthInches 4
Cable length4 in (10.2 cm)
Build detailsPlastic or Rubber

Questions about this item

How can I confirm the GinTai NE3401 cable is delivering stable power to my GPU after connecting it?

Verify the dual latches click securely into both the PSU 8-pin and each graphics-card 8-pin socket, then monitor GPU voltages in software to ensure they remain steady under load.

What comes in the package and is anything else required to use the NE3401 with a Tesla K80 or similar card?

The box contains one 10 cm Y-splitter cable with an 8-pin GPU female input and dual 8-pin PCIe male outputs; no extra parts are needed if your power supply has a spare 8-pin GPU connector.

Which version of the GinTai NE3401 should I choose for a CMP 170HX or other 8-pin NVIDIA GPU?

The single listed model NE3401 is built for any NVIDIA GPU with an 8-pin input — including Tesla K80, M40, M60, P40, P100 and CMP 170HX — so select this one.

More in Internal PSU & Riser Cables

Similar items