Kanto SUB8VMW 8-inch 300W Sealed Powered Subwoofer White home audio speaker
- Single
- 300 W Peak Power
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Two in-wall centre-channel speakers with dual 6.5" woofers and a 12mm tweeter cover 33Hz-22 kHz at 98dB and mount tool-free via Pressure Lock clamps
The Goldwood Sound HD6c set provides two flush-mount in-wall center channel speakers for home theater or whole-house audio. Each unit uses dual 6.5" woven fiber woofers and a 12mm soft dome tweeter in a passive design that draws power from an external receiver or amplifier. The pressure lock mounting system clamps to drywall without separate hardware, and the removable grilles accept paint for décor matching.
Replacing a single center speaker or bookshelf pair with this dual-woofer configuration widens horizontal dispersion across the listening area. The jump is worthwhile when dialogue clarity and a broad front soundstage matter more than a compact footprint, and when the installation allows a rectangular cutout of 19.21" x 7.4" with 3.03" mounting depth. Buyers needing a smaller cutout or an active powered design should look elsewhere.
The speakers connect via spring-loaded raw wire terminals and require CL3-rated in-wall speaker cable from any receiver with raw speaker wire outputs. Amplifier power per channel must stay between 10 and 350 watts into 8 ohms, and the system delivers 98dB sensitivity with a 33Hz to 22kHz frequency response. Installations lacking a compatible receiver, appropriate in-wall wiring, or sufficient cavity depth cannot use this set.
Measured against everything we stock in Home Speakers & Subwoofers, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | Acoustic Audio by Goldwood |
| Product type | Center Channel Speaker |
The speaker fits a 19.21" x 7.4" hole and requires 3.03" of mounting depth.
The clamps tighten against the drywall without any hardware; the common error is over-tightening and cracking the board.
Replace the wire if the insulation is damaged, the conductors are corroded, or you rewire the room for a different layout.
More in Home Speakers & Subwoofers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?