Goldwood Sound R192 frameless in-ceiling speaker 12-pack home audio speaker

Frameless 12-pack in-ceiling speakers

The Acoustic Audio R192 set delivers twelve frameless two-way speakers for whole-home audio or surround sound. Each unit uses a 5.25 inch poly cone woofer and a 0.5 inch Mylar tweeter to cover 45Hz to 22kHz at 95dB sensitivity. Magnetically attached paintable grilles create a flush frameless look on ceilings or walls. The Pressure Lock Mounting System clamps to drywall without separate hardware.

Check receiver power and wiring before ordering

Your amplifier must supply between 10 and 200 watts per channel into 8 ohms and provide raw speaker wire outputs. Use CL3 rated in-wall speaker cable for the runs from the receiver to each location. Cut round openings of 7.01 inch diameter and confirm at least 2.95 inch mounting depth behind the surface. Spring loaded terminals accept bare wire only.

Suits multi-room installs.

Builders wiring a 12 zone distributed audio system or a large home theatre will appreciate the consistent voicing and frameless aesthetics. Buyers who want self powered speakers, wireless connectivity or a smaller pair count should look at alternative designs. The passive design also requires a separate amplifier capable of driving all connected channels.