We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five black braided PWM fan splitter cables, each 10.6 inches long with one 4-pin female connector splitting to three male connectors

HANNORD

HANNORD 1007 1-to-3 PWM fan splitter cable 10.6 in 5-pack

SKU CH-X8QG-G55BB MPN 1007

Connects three PWM or 3-pin fans to one motherboard header using 10.6-inch sleeved cables

  • Cable length10.6 in (26.9 cm)
  • First connector1x TX4 female
  • Second connector3x TX3/TX4 male
  • Connector count4
  • Connector detailsType - 1 × 4 PWM fan power splitter cable Connector A - 1 x
  • Product typeCable Splitters

Style 5-Pack

  • Controls three PWM fans from one motherboard header using a single RPM signal
  • 6-inch braided sleeved cable reaches across standard mid-tower cases
  • 24 AWG tinned copper conductors rated for 80 °C continuous operation
  • Five cables in one pack let you wire multiple fan groups cleanly
  • Splits one 4-pin female into three male connectors for 3-pin and 4-pin fans

5-pack PWM fan splitter cables

Each pack contains five black sleeved cables that split a single motherboard PWM header into three fan connections. Every cable measures 10.6 inches and uses 24 awg tinned copper conductors rated for 12 VDC operation. The 1-to-3 design lets builders run three case fans from one header without extra controllers.

Build integration and header management

Connector A is a 4-pin TX4 female that plugs into the motherboard; connector B provides three male ends — one full 4-pin and two 3-pin — so both PWM and voltage-controlled fans are supported. Only the 4-pin branch returns a tachometer signal, leaving the other two fans speed-controlled without RPM reporting. The 10.6-inch length reaches most mid-tower fan positions while keeping cable routing tidy.

Suitable for multi-fan setups on limited headers

Ideal for builders who need extra intake or exhaust fans but have few motherboard headers available. Not suited for users who require individual RPM monitoring on every fan or who need longer runs for full-tower or distributed radiator layouts.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $11.99
Cheaper than about 65% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product typeCable Splitters
Product colorBlack
Ports & slots
First connector1x TX4 female
Second connector3x TX3/TX4 male
Connector count4
Size & build
Overall length10.6 in (26.9 cm)
Cable length10.6 in (26.9 cm)

Other versions of this model

2 more in the same range

Questions about this item

How many fans can draw power from one motherboard header using this splitter?

The cable splits one 4-pin header into three connectors so three fans share the same 12 VDC supply.

Does the braided sleeving add noticeable heat or noise during continuous operation?

The PVC-insulated 24 AWG wires are rated to 80 °C and carry only the fan current; the braid itself adds no active cooling or noise.

What fan connector types must I already have for the three male ends to fit?

You need fans with standard 4-pin PWM or 3-pin headers; one splitter end is a full 4-pin plug and the other two are 3-pin (tachometer wire omitted).

More in Internal PSU & Riser Cables

Similar items