We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three black braided PWM fan splitter cables, each 10.6 inches long with one 4-pin female and three male connectors

HANNORD

HANNORD 1007 4-pin PWM fan splitter cable 1-to-3 10.6" 3-pack

SKU CH-7GTB-7GVKC MPN 1007

Connects three PWM fans to one motherboard header using a 10.6-inch sleeved cable with one 4-pin and two 3-pin male connectors

  • Cable length10.6 in (26.9 cm)
  • First connector1x TX4 female
  • Second connector3x TX3/TX4 male
  • Connector count4
  • Connector detailsType - 1 × 4 PWM fan power splitter cable Connector A - 1 x
  • Product typeCable Splitters

Style 3-Pack

  • Connects three fans to one motherboard header
  • One 4-pin and two 3-pin male connectors included
  • 6 inch length suits most case layouts
  • Black braided sleeve protects wires inside case
  • 24 AWG tinned copper conductors rated to 80 °C

4-Pin PWM Fan Splitter Cable 1-to-3

This HANNORD 1007 splitter connects one motherboard 4-pin header to three case fans. Two output connectors carry three wires and lack the tachometer pin, so only one fan reports speed to the board. The 10.6 inch length suits typical mid-tower routing. Supplied as a three-pack for multi-fan builds.

Verify Header Pin Count and Fan Connector Types

Check that the target motherboard header is a standard 4-pin PWM type and that your fans use 3-pin or 4-pin plugs. The splitter draws power for all three fans from a single header, so confirm the header current rating matches the combined fan draw. No additional adapters are included in the package.

Builders Adding Multiple Case Fans to One Header

Ideal for users who need extra airflow but have limited fan headers on the motherboard. Not suitable for setups requiring independent speed monitoring of every fan, since only one tachometer signal is passed through. Users needing per-fan RPM data should look at a controller with separate sensor inputs.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $8.99
Cheaper than about 90% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product typeCable Splitters
Product colorBlack
Ports & slots
First connector1x TX4 female
Second connector3x TX3/TX4 male
Connector count4
Size & build
Overall length10.6 in (26.9 cm)
Cable length10.6 in (26.9 cm)

Other versions of this model

2 more in the same range

Questions about this item

What connectors come in the 3-pack and do I need extra cables for my fans?

Each pack contains three splitter cables; each cable has one 4-pin female connector for the motherboard header and splits to three male connectors — one 4-pin and two 3-pin — so 4-pin or 3-pin fans plug in directly with no extra cables required.

Which of the three male connectors on each splitter should I use for a 4-pin PWM fan versus a 3-pin fan?

Use the single 4-pin male connector for a 4-pin PWM fan so the motherboard can read its speed signal; the two 3-pin male connectors (missing the tach pin) are for 3-pin fans or 4-pin fans you are happy to run without RPM reporting.

What does the 10.6-inch length mean when the cable is routed inside a typical case?

At 10.6 inches (about 25 cm) the cable reaches from a motherboard fan header to fans mounted in the front, top or rear of most mid-tower cases without stretching, and the black braided sleeving keeps the wiring tidy.

More in Internal PSU & Riser Cables

Similar items