HANNORD SATA 15-pin to 6-pin Power Cable 20 cm 2 Pack
Converts a SATA 15-pin connector to a 6-pin PCIe plug so a graphics card can draw power from the existing supply, 20 cm length for tidy routing, two cables included
- Product colorBlack
Pack 2 packs
- 1 Pack$4.99
- 2 packs$6.99
- 3 packs$9.99
- 5 packs$9.99
- Powers a graphics card when PCIe connectors are missing using a SATA 15 pin to 6 pin adapter
- Keeps internal wiring tidy with a short 20 cm cable length
- Reduces strain on motherboard and drive connectors by extending the SATA power connection
- Works with an existing SATA power supply so no PSU upgrade is required
- Compatible with GTX 750 Ti, GTX 1070 Ti and GTX 1080 Ti graphics cards
SATA 15-pin to 6-pin adapter
This cable converts a SATA 15-pin power connector into a 6-pin PCIe plug so a graphics card can draw power from the supply's existing SATA leads. It is aimed at builders whose power supply lacks enough native PCIe connectors for the card they want to install. The pack contains two identical cables for dual-connector cards or separate builds.
20 cm black cables for tight routing
Each cable measures 20 cm, keeping excess length to a minimum and helping tidy the interior of compact cases. The short run reduces strain on both the SATA source connector and the card's 6-pin socket during installation and later upgrades. Black insulation blends with standard loom colours for a clean look.
Thermals noise and power draw
The adapter is a passive copper assembly with no active components, so it adds no fan noise and generates no measurable heat of its own. Power delivery depends entirely on the host supply's SATA rail capacity and the graphics card's actual draw. Builders should verify that the SATA rail can sustain the card's load before relying on this adapter.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 85% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Black |
Other versions of this model
3 more in the same range
Questions about this item
What does the SATA 15-pin to 6-pin adapter actually power?
It converts a SATA power connector into a 6-pin PCIe plug so you can run a video card when the power supply lacks native PCIe connectors.
How much clearance does the 20 cm cable need inside the case?
The 20 cm length is designed for tight internal routing; allow enough space for the 15-pin SATA plug and the 6-pin PCIe end to sit without sharp bends.
Which way round do the connectors go when installing the adapter?
Push the 15-pin SATA end firmly into a free SATA power lead from the PSU, then seat the 6-pin PCIe end into the graphics card until the latch clicks.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair
- 1.64 ft (0.5m)
- SATA II
EN-Labs SATA18BK90 SATA cable 18 inch 90 to 180 degree latching
- 18 in (45.7 cm)
- Cable Connectors
STARTECH SATAPOWADPL 6 in 4 pin Molex to left angle SATA power adapter cable
- 6 in (15.2 cm)
- Cable Connectors
EN-Labs SATA18UVGN-3PACK 3-pack 18 inch SATA cable
- 1.5 ft (0.46 m)
- Cable Kits








