We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel hydrothermal reactor with PTFE lining, 150ml capacity

HNZXIB

HNZXIB 150ml Hydrothermal Synthesis Reactor 240°C KH series

SKU CH-8AP1-DSWTF

A 150 ml hydrothermal synthesis reactor with a PTFE lining and non-magnetic stainless steel body, rated for 240 °C maximum temperature and 220 °C safety temperature

  • Total capacity150ml
  • Temperature rangeRT~240 °C
  • Product typeGlass Reactor
  • 150 ml capacity handles larger sample volumes
  • PTFE inner lining resists acids and alkalis
  • Non-magnetic 0Cr18Ni9Ti stainless steel body prevents interference
  • Operates up to 240 °C with 220 °C safety limit
  • Heating and cooling rates below 5 °C/min protect vessel integrity

150ml Hydrothermal Synthesis Reactor

The HNZXIB KH-series reactor provides a 150ml PTFE-lined vessel for hydrothermal synthesis up to 240°C. It serves university teaching labs and research units that need a small-scale pressure vessel for digesting heavy metals, pesticide residues, rare earth products and other insoluble materials in acid or alkali environments.

Setup checks before ordering

Confirm that your oven or furnace can hold the heating and cooling rate below 5°C per minute and that the maximum operating temperature of 240°C is not exceeded. Verify that the intended fill volume stays at or below 80 percent of the 150ml capacity and that the safety pressure limit of 3 Mpa is compatible with your facility's pressure-rated equipment.

Behaviour under sustained load

The non-magnetic 0Cr18Ni9Ti stainless steel shell and Teflon inner lining maintain acid and alkali resistance during prolonged high-temperature runs. Heating and cooling rates are kept under 5°C per minute to protect the liner, and the vessel must cool naturally to room temperature before opening after each cycle.

How it compares

Measured against everything we stock in Lab Equipment & Supplies, at today’s prices. Recalculated every night.

Price $205.99
Pricier than about 63% of the 734 comparable items (median $60.99).

Specifications

Product
Total capacity150ml
Product typeGlass Reactor
Environment & compliance
Temperature rangeRT~240 °C

Questions about this item

Does the reactor arrive with the PTFE liner and stainless-steel vessel assembled, or must any part be purchased separately?

The autoclave is shipped as a complete KH-150 unit with the non-magnetic 0Cr18Ni9Ti stainless-steel body and the Teflon inner liner already fitted inside the wooden case; no additional components are required for standard hydrothermal runs.

Is the 150 ml capacity the only volume available for this KH series model?

The listing specifies the KH-150 variant with a 150 ml inner volume; the supplier notes that capacity volume is customizable, so other sizes can be requested directly.

What does the 240 °C maximum temperature mean for an actual synthesis cycle?

You may heat the sealed vessel to 240 °C provided the ramp stays below 5 °C per minute, the fill level does not exceed 80 % of the 150 ml liner, and the safety pressure limit of 3 MPa is not surpassed; cooling must also stay under 5 °C per minute before opening.

More in Lab Equipment & Supplies

Similar items