HP ProLiant DL160 Gen9 1U rack server 2× Xeon E5-2630 v3 2.4GHz 32GB DDR4 B140i 8 SFF
- 1U
- Rack
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
1U rack server with dual Xeon E5-2603 v3 processors, 16 GB DDR4 memory, two 1 TB SATA drives and B140i RAID
Installed Memory Size 16GB
HDD 2 x 1TB
This 1U rack server ships with dual Xeon E5-2603 v3 processors at 1.6 GHz and 16 GB of DDR4 memory. The eight-bay small-form-factor chassis holds two installed 1 TB SATA drives and is managed by a B140i software RAID controller. Redundant hot-swap power supplies are included.
The jump is worthwhile when workloads benefit from twelve total cores and up to 36 cores supported by the C610 chipset. Memory capacity reaches 1 TB across sixteen DIMM slots using DDR4 modules up to 2400 MT/s ECC registered. The B140i controller handles RAID 0, 1, 5 for SATA drives only.
Dual 550 W power supplies share the load during continuous operation. Eight drive bays allow additional 2.5 inch SATA or SAS storage for throughput-heavy tasks. The Matrox G200 graphics core provides basic management video without adding thermal load. Memory speed depends on the installed processor capability.
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HP |
| Product line | ProLiant |
| Model name | Proliant DL160 G9 |
| Product type | Rack |
| Processor | |
| Processor | Intel Xeon E5 v3 |
| Chipset | Intel C610 |
| Max supported CPUs | 2 |
| Memory | |
| Installed RAM | 16 GB |
| Type of memory | DDR4 |
| Maximum RAM capacity | 16 GB |
| Memory slot count | 16 |
| Storage | |
| Installed SSD | No |
| Disk controller | B140i Software RAID |
| Drive interface | SATA |
| Supported RAID levels | 0,1,5 |
| Optical drive | None |
| Graphics | |
| Video RAM | 16 MB |
| Graphics chip | Matrox G200 |
| Ports & slots | |
| Network ports | 2 x Ports |
| Power | |
| Hot-swap redundant PSU | Yes |
| Size & build | |
| Rack height | 1U |
| Product weight | 63 lb (28.6 kg) |
| Software | |
| Operating system | No |
| More details | |
| Management controller | iLO Management (standard). |
Other versions of this model
The server is a 1U rack-mount unit; it requires a standard four-post rack and the appropriate sliding rail kit for the HP ProLiant DL160 Gen9.
Each 2.5-inch drive slides into a hot-swap tray that locks into one of the eight SFF bays; the trays are included with the drives and must be fully seated for the B140i controller to detect them.
The system has 16 DDR4 DIMM slots (eight per processor) and supports 4 GB, 8 GB, 16 GB, 32 GB or 64 GB ECC Registered DDR4 up to 2400 MT/s, with actual speed limited by the Xeon E5-2603 v3 capability.
More in Rack & Tower Servers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?