HP ProLiant DL160 Gen9 1U rack server E5-2650 v3 10C 2.3GHz 16GB DDR4 2x 1TB SATA B140i
- 1U
- Rack
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
1U rack server with Xeon E5-2623 v3 quad-core processor, 16GB DDR4 memory and two 500GB SATA drives on B140i software RAID
Installed Memory Size 16GB
HDD 2 x 500GB
The HP ProLiant DL160 Gen9 is a 1U rack server built for balanced workloads. It ships with a single Intel Xeon E5-2623 v3 quad-core processor running at 3 GHz and 16 GB of DDR4 memory. Two 500 GB 7.2 K 2.5-inch SATA drives are installed on the B140i software RAID controller.
This server suits environments that run SATA drives with RAID 0, 1 or 5 on the onboard B140i controller. It does not meet the needs of buyers who require hardware RAID or SAS connectivity, or builders who need more than two processors.
The unit arrives with 16 GB of DDR4 ECC registered memory, which matches the listed maximum installed capacity for this specific configuration. DDR4 is the only supported memory type; other DDR generations will not fit.
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HP |
| Product line | ProLiant |
| Model name | Proliant DL160 G9 |
| Product type | Rack |
| Processor | |
| Processor | Intel Xeon E5 v3 |
| Chipset | Intel C610 |
| Max supported CPUs | 2 |
| Memory | |
| Installed RAM | 16 GB |
| Type of memory | DDR4 |
| Maximum RAM capacity | 16 GB |
| Memory slot count | 16 |
| Storage | |
| Installed SSD | No |
| Disk controller | B140i Software RAID |
| Drive interface | SATA |
| Supported RAID levels | 0,1,5 |
| Optical drive | None |
| Graphics | |
| Video RAM | 16 MB |
| Graphics chip | Matrox G200 |
| Ports & slots | |
| Network ports | 2 x Ports |
| Power | |
| Hot-swap redundant PSU | Yes |
| Size & build | |
| Rack height | 1U |
| Product weight | 63 lb (28.6 kg) |
| Software | |
| Operating system | No |
| More details | |
| Management controller | iLO Management (standard). |
Other versions of this model
The server uses the Intel C610 chipset and supports DDR4 ECC Registered modules up to 2400 MT/s, matching other Gen9 platforms that share the same chipset and memory architecture.
During POST the B140i option ROM will list the two 500 GB 7.2K 2.5-inch SATA drives and show the configured RAID level 0, 1 or 5; iLO health view also reports drive status and controller firmware version.
Included: single E5-2623 v3 processor, 16 GB DDR4, two 500 GB 2.5-inch SATA drives with trays, 550 W hot-swap power supply, Matrox G200 graphics, B140i SATA RAID. Not included: operating system, second processor, additional memory modules, extra drive trays or universal media bay.
More in Rack & Tower Servers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?