HP ProLiant DL360 Gen9 1U rack server E5-2670 v3 12-core 2.3GHz 48GB DDR4 2x 500GB SATA B140i
- 1U
- Rack
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
1U rack server with single Xeon E5-2620 v3, 8 GB DDR4, two 1 TB SATA drives and B140i software RAID
Installed Memory Size 8GB
HDD 2 x 1TB
The HP ProLiant DL360 Gen9 fits eight 2.5-inch SATA drives in a 1U rack frame. A single Intel Xeon E5-2620 v3 six-core processor at 2.4 GHz and 8 GB of DDR4 ECC memory are installed. Dual 500 W hot-swap power supplies provide redundancy for continuous operation.
This configuration uses the B140i software RAID controller, which supports RAID 0, 1, 5 and 10 on SATA drives only. Organisations needing hardware RAID acceleration, SAS connectivity or GPU compute should consider other platforms. The single-socket layout leaves one processor socket free for future expansion.
Memory scales to 3 TB across 24 slots when a second processor is added, using 4 GB to 64 GB DDR4 ECC registered modules up to 2400 MT/s. The installed 8 GB occupy only a fraction of total capacity, leaving ample headroom for memory-intensive workloads.
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HP |
| Product line | ProLiant |
| Model name | Proliant DL360 G9 |
| Product type | Rack |
| Processor | |
| Processor | Intel Xeon E5 v3 |
| Chipset | Intel C610 |
| Max supported CPUs | 2 |
| Memory | |
| Installed RAM | 8 GB |
| Type of memory | DDR4 |
| Maximum RAM capacity | 8 GB |
| Memory slot count | 24 |
| Storage | |
| Installed SSD | No |
| Disk controller | B140i Software RAID |
| Drive interface | SATA |
| Supported RAID levels | RAID 0/1/5/10 |
| Optical drive | None |
| Graphics | |
| Video RAM | 16 MB |
| Graphics chip | Matrox G200 |
| Ports & slots | |
| Network ports | 4 x Ports |
| Power | |
| Hot-swap redundant PSU | Yes |
| Size & build | |
| Rack height | 1U |
| Product weight | 63 lb (28.6 kg) |
| Software | |
| Operating system | No |
| More details | |
| Management controller | iLO Management (standard). |
Other versions of this model
Remove the blanking plate from the second CPU socket, insert the processor, then fit the matching heatsink and connect its fan cable; the step most installers forget is plugging the second heatsink fan into the correct system-board header so the server will boot.
The two 1 TB 7.2K 2.5" SATA drives contain mechanical platters and are the components most likely to require replacement before the solid-state B140i controller or the 500 W redundant power supplies.
The installed 8 GB of DDR4 memory fills quickly under sustained load, and because the B140i software RAID supports only SATA drives, storage throughput becomes the next bottleneck before the dual 500 W power supplies or the single E5-2620 v3 CPU reach their limits.
More in Rack & Tower Servers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?