HP ProLiant DL360 Gen9 1U rack server 2× Xeon E5-2670 v3 12-core 2.3 GHz 16 GB DDR4 B140i 8 SFF

Dense 1U rack server for virtualised workloads

The HP ProLiant DL360 Gen9 fits a single rack unit and ships with two Xeon E5-2670 v3 processors. Each CPU provides twelve cores at 2.3 GHz, giving 24 physical cores and 48 threads with hyper-threading. Sixteen gigabytes of DDR4 ECC registered memory are installed across the 24 DIMM slots. The platform targets organisations that need high core density in limited rack space.

B140i software RAID limited to SATA drives

The onboard B140i controller supports RAID 0, 1, 5 and 10 but only with SATA media. SAS drives are not supported by this controller, so arrays requiring SAS must use an additional HBA. Eight 2.5-inch SFF bays are available, though only two drive trays with screws are included. No drives or operating system ship with the unit.

Redundant hot-swap power and Matrox G200 graphics

Two 500 W hot-swap power supplies provide N+N redundancy without downtime during replacement. Video output relies on a Matrox G200 chip with 16 MB memory, sufficient for console management but not for graphical workloads. The 1U chassis leaves no room for full-height expansion cards; only low-profile adapters can be installed. Buyers who need GPU acceleration or more than two low-profile slots should consider a larger form factor.