We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

HUADISK

HUADISK HYV128X3(4280) 128GB 2242 NVMe internal SSD

SKU CH-XH66-A19QN

128 GB 2242 NVMe drive includes a 2280 extension board for dual-slot compatibility, delivering 2000 MBps read and 1100 MBps write

  • Total capacity128 GB
  • Sequential read speedUp to 2,000 MB/s
  • Sequential write speedUp to 1,100 MB/s
  • Interface typePCI-Express 3.0 x4
  • Form factorM.2 2280
  • Random read (4K)Up to 200,000 IOPS

Capacity 128GB

  • Sequential read speed up to 2000 MBps for fast boot and load times
  • Sequential write speed up to 1100 MBps for quick file saves
  • Random read up to 200000 IOPS for snappy multitasking
  • Random write up to 230000 IOPS for responsive application performance
  • 60 TBW endurance rating supports heavy daily workloads

128 GB 2242 NVMe with 2280 adapter

The HUADISK HYV128X3(4280) is a 128 GB internal SSD built on 3D NAND and the NVMe 1.3 protocol. It ships as a 2242 module paired with an extension board that converts it to the 2280 form factor for dual-slot compatibility. The drive targets laptops, desktops and single-board computers such as Raspberry Pi where a compact NVMe upgrade is needed.

Graphene cooling and tool-free conversion

The 2242 module uses a graphene layer to dissipate heat during sustained workloads such as 4K editing or large file transfers. Attaching the supplied extension board requires no tools and retains full PCIe 3.0 x4 signalling, so the drive fits both 2242 and 2280 M.2 slots without performance loss. Active power draw is 3.23 W and idle draw is 1.19 W.

PCIe 3.0 x4 limits sequential speed to 2000 MB/s

The four-lane Gen 3 interface caps maximum sequential read at 2000 MB/s and write at 1100 MB/s, with 4 KB random performance of 200,000 read IOPS and 230,000 write IOPS. Endurance is rated at 60 TBW and MTBF at 1,000,000 hours. Operating temperature range is 0 °C to 70 °C, so sustained heavy loads in poorly ventilated chassis may throttle before the drive reaches its peak throughput.

How it compares

Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.

Price $37.99
Cheaper than about 93% of the 1,994 comparable items (median $180.49).
Total capacity 128 GB
Lower than about 95% of the 1,368 comparable items (median 1 TB).
Sequential read speed Up to 2,000 MB/s
Typical for this category: the median of 1,180 items is 2,400 MB/s.
Price per TB $296.80 per TB
Pricier than about 75% of the 1,362 comparable items (median $165.50 per TB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameHUADISK
Product lineHYVXXXX3(4280)
Model nameHYV128 × 3(4280)
Total capacity128 GB
Product typeInternal Solid State Drive (SSD)
Intended useConsumer
Performance
Sequential read speedUp to 2,000 MB/s
Sequential write speedUp to 1,100 MB/s
Random read (4K)Up to 200,000 IOPS
Random write (4K)Up to 230,000 IOPS
Storage
Write endurance60 TB
NAND flash type3D NAND
Connectivity
Connection protocolNVMe 1.3
Ports & slots
Interface typePCI-Express 3.0 x4
Power
Active power draw3.23 W
Idle power draw1.19 W
Size & build
Form factorM.2 2280
Heat sinkWithout HeatSink
Overall height22 mm
Overall width80 mm
Product depth2.1 mm
Product weight100g
Environment & compliance
Operating temperature range0 °C to 70 °C
Storage temperature range-20 °C to 75 °C
Operating humidity range5-95%
More details
Mean time between failures1,000,000 h

Other versions of this model

1 more in the same range

Questions about this item

What interface and PCIe generation does the HUADISK HYV128X3(4280) use, and what throughput does that cap?

It runs on PCI-Express 3.0 x4 with NVMe 1.3, limiting sequential reads to 2000 MBps and writes to 1100 MBps.

What physical space and mounting points does the drive need?

The module is 22 mm by 80 mm by 2.1 mm and weighs 100 g, fitting a standard M.2 2280 slot with a single screw mount.

More in Internal NVMe & SATA SSDs

Similar items