HUADISK HYV128X3(4280) 128GB 2242 NVMe internal SSD
- Up to 2,000 MB/s
- Up to 1,100 MB/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 256 GB internal SSD with a 2242 module and 2280 extension board for dual-slot compatibility, delivering up to 1700 MBps read and 1300 MBps write speeds
Capacity 256GB
The HUADISK HYV256X3(4280) is a 256GB internal SSD that ships as a 2242 module with a 2280 extension board. It uses 3D NAND flash and the NVMe 1.3 protocol over a PCI-Express 3.0 x4 interface to deliver sequential reads up to 1700 MBps and writes up to 1300 MBps.
This drive suits owners of laptops or single-board computers that only have a 2242 M.2 slot but want the option to fit a standard 2280 bay later. It is not suited for systems that require a heatsink-equipped drive or for workloads that need sustained throughput beyond the rated 1300 MBps write ceiling.
The physical length is the deciding factor because the base module measures 2242 while the included extension board brings it to 2280, so you must verify which M.2 key and length your motherboard or laptop actually accepts before buying.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HUADISK |
| Product line | HYVXXXX3(4280) |
| Model name | HYV256 × 3(4280) |
| Total capacity | 256 GB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 1,700 MB/s |
| Sequential write speed | Up to 1,300 MB/s |
| Random read (4K) | Up to 200,000 IOPS |
| Random write (4K) | Up to 230,000 IOPS |
| Storage | |
| Write endurance | 200 TB |
| NAND flash type | 3D NAND |
| Connectivity | |
| Connection protocol | NVMe 1.3 |
| Ports & slots | |
| Interface type | PCI-Express 3.0 x4 |
| Power | |
| Active power draw | 3.23 W |
| Idle power draw | 1.19 W |
| Size & build | |
| Form factor | M.2 2280 |
| Heat sink | Without HeatSink |
| Overall height | 22 mm |
| Overall width | 80 mm |
| Product depth | 2.1 mm |
| Product weight | 100g |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -20 °C to 75 °C |
| Operating humidity range | 5-95% |
| More details | |
| Mean time between failures | 1,000,000 h |
Other versions of this model
The supplied board converts the native 2242 module to the full 2280 length, so the assembly occupies a 2280 slot as a single unit.
Yes, the drive uses the PCIe 3.0 x4 interface and NVMe 1.3 protocol, matching that requirement exactly.
The module uses graphene cooling material instead of a traditional heatsink and is rated for 0 °C to 70 °C operation.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?