We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal dual 2.5 inch drive cage fits one 3.5 inch bay with removable trays and front LEDs

ICY DOCK

ICY DOCK MB992SKR-B dual 2.5" SATA to 3.5" RAID hdd accessory

SKU CH-MRGM-7NJA3 MPN MB992SKR-B

Holds two 2.5" SATA drives in one 3.5" bay with hardware RAID 0, 1, JBOD or BIG and hot-swap trays

  • Conversion tray2 × 2.5 in Drive to 3.5 in Bay
  • Mobile rack drives supportMulti 2.5 in Drives to 3.5 in Bay
  • Mobile rack interfaceSATA I/II/III
  • Protection caseMultiple Drives
  • Product colorBlack
  • For use with2.5 in (6.35 cm)

Model ToughArmors 2BAY-RAID

Show 4 more

Model 2-Bay (2.5in SATA)

  • Hardware RAID 0, 1, JBOD and BIG modes built in
  • Two 2.5" SATA drives fit one 3.5" bay
  • Hot-swap trays with front LED status lights
  • Full-metal body meets flammability standards
  • Up to 6 Gb/s transfer via SATA 7-pin host link

Dual 2.5" SATA RAID adapter

The ICY DOCK MB992SKR-B is a ToughArmor mobile rack that fits two 2.5" SATA hard drives or solid-state drives up to 9.5 mm tall into one 3.5" front device bay. A built-in hardware RAID controller offers RAID 0, RAID 1, JBOD and BIG modes selectable on the unit. The enclosure connects through a single SATA 7-pin host interface and a SATA 15-pin power connector. Full metal construction meets flammability requirements for rugged environments.

Suits RAID arrays in tight bays

Builders who want hardware RAID 0 or RAID 1 without using a motherboard controller will find the integrated processor convenient. The removable tray system supports hot swap so drives can be changed without powering down. Front LED indicators show power, access, drive fail and RAID 1 rebuild status at a glance. Users needing more than two drives or a different bay form factor should consider other solutions.

Single SATA host link

The backplane provides one SATA 7-pin connection to the host, so both installed drives share a single 6 Gb/s channel. This bandwidth limit is the key specification that determines whether the adapter meets the performance needs of the intended workload.

How it compares

Measured against everything we stock in Drive Brackets & Mounting Kits, at today’s prices. Recalculated every night.

Price $125.99
Pricier than about 87% of the 218 comparable items (median $26.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameICY DOCK
Model nameMB992SKR-B
Product colorBlack
Storage
Mobile rack drives supportMulti 2.5 in Drives to 3.5 in Bay
Ports & slots
Mobile rack interfaceSATA I/II/III
Size & build
Shipping weight0.57 kg
Package size180 × 122 × 38 mm
Compatibility
For use with2.5 in (6.35 cm)
More details
Conversion tray2 × 2.5 in Drive to 3.5 in Bay
Protection caseMultiple Drives

Other versions of this model

5 more in the same range

Questions about this item

How hot or noisy does the MB992SKR-B get when both drives run continuously?

The full metal body acts as a heatsink with no fan, so it runs silently and stays cool during all‑day operation.

Which cables and host connectors must my system already provide for the MB992SKR-B?

You need one free 3.5" front bay, a SATA 7‑pin data cable and a SATA 15‑pin power connector from the PSU.

Will the MB992SKR-B work with older SATA I or II drives I want to keep using?

Yes, the backplane supports SATA I, II and III, so legacy 2.5" drives up to 9.5 mm height work without changes.

More in Drive Brackets & Mounting Kits

Similar items