TRENDnet TK-207K 2-Port USB KVM Switch
- 1 x USB (Type A), 1…
- 2 x USB Keyboard/Mo…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Shares two monitors and four USB 3.0 ports between two PCs with 8K at 60 Hz and a wired desktop controller
This IHDAPP KVM switch lets two computers share two monitors, accepting one HDMI 2.1 and one DisplayPort 1.4 input per system and providing one HDMI and one DisplayPort output. It supports duplication and expansion modes for flexible desktop layouts. A wired desktop controller and front push buttons give instant PC switching.
The switch targets users who need simultaneous dual-monitor operation across two PCs with mixed HDMI and DisplayPort outputs. It also shares four USB 3.0 peripherals, including a USB-C port for data only. Buyers whose computers lack both an HDMI and a DisplayPort output cannot use this unit, and anyone needing video over USB-C should look elsewhere.
The decisive spec is the 8K 60 Hz ceiling, with backward compatibility for 4K 120 Hz and 2K 144 Hz signals. HDMI 2.1 and DisplayPort 1.4 interfaces carry the video, while USB 3.0 peripheral sharing runs at 5 Gbps. The USB-C port does not transmit video, so monitor connections must use the dedicated HDMI and DisplayPort outputs.
Measured against everything we stock in KVM Switches & Rack Consoles, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Product type | HDMI, DisplayPort, USB |
| Display | |
| Supported video resolution | These dual-monitor KVM switches support up to 7680 × 4320@60 Hz and are backward compatible with 4K@120 Hz, 2K@144 Hz and below. |
| Ports & slots | |
| PC connections | HDMI2.1, Dp 1.4, USB 3.0 |
| Computer ports | HDMI + Displayport |
| Monitor ports | 2 Ports |
| Power | |
| Power requirements | USB Power Cable |
| Size & build | |
| Product dimensions | 5.6 × 1 × 2.6 in |
| Product weight | 260g |
| In the box | |
| In the box | 1x HDMI+ Displayport KVM Switch, 1x 5 V 2A Charger, 1x 1.5m/4.9 ft Desktop Controller, 2x 1m/3.3 ft USB3.0 Cables, 1x USB Charger and USB Power Cable and 1x User Manual |
| More details | |
| Switching method | Push Buttons and Wired Remote |
| Status lights | Yes |
Each computer needs one HDMI 2.1 and one DisplayPort 1.4 output to match the switch inputs.
Yes, the switch is backward compatible with 4K at 120 Hz and 2K at 144 Hz as well as lower resolutions.
Check the LED indicators for the active PC and verify each monitor reports 7680×4320 at 60 Hz in its on-screen display.
More in KVM Switches & Rack Consoles
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?