XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
2.5-inch SATA internal SSD with 240GB MLC storage, 55mW idle and 140mW active power, plus 1500G shock resistance
The Intel 530 Series SSDSC2BW240A4 is a 2.5-inch internal solid-state drive with a 240GB capacity. It connects over a SATA 3.0 6Gb/S interface and uses MLC memory components. The drive is built for consumer workloads such as operating system boots, application loading and general file storage.
Replacing a traditional spinning disk with this SSD removes seek latency and cuts read latency to 80 µs and write latency to 85 µs. The jump is worth it when faster boot times, quicker application launches and silent operation matter more than maximum capacity. A MTBF of 1,200,000 hours and shock resistance of 1500 G at 0.5 msec add durability for mobile use.
Active power consumption stays at 140 mW while idle power drops to 55 mW, so thermal output remains low during extended transfers. The operating temperature range of 0°C to 70°C supports continuous operation in compact chassis without throttling. Consistent latency figures indicate predictable performance across long write sessions rather than only in short bursts.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Intel |
| Product line | 530 Series |
| Model name | SSDSC2BW240A4 |
| Total capacity | 240 GB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Read latency | 80 µs |
| Write latency | 85 µs |
| Storage | |
| NAND flash type | MLC |
| Ports & slots | |
| Interface type | SATA 3.0 6Gb/S |
| Power | |
| Active power draw | 140 mW |
| Idle power draw | 55 mW |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Overall height | 7 mm |
| Product weight | 78g |
| Environment & compliance | |
| Max shock tolerance | 1500 G (Max) at 0.5 msec |
| Operating temperature range | 0 °C to 70 °C |
| More details | |
| Mean time between failures | 1,200,000 h |
The drive is 7.00mm tall, matching the standard 2.5" SATA laptop bay height.
Connect both the SATA data cable and the SATA power connector; forgetting the power lead is the common error.
The supplier notes up to 25 bad sectors may develop over time on these used units.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?