XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
373 GB internal SSD using PCIe 3.0 NVMe and 2.5 inch U.2 form factor, delivering 2400 Mbps read, 2000 Mbps write, 550000 IOPS random read and 50000 IOPS random write with 2000000 hour MTBF at 18 W
The Intel Optane DC P4800X is a 373GB internal solid-state drive built for enterprise workloads. It uses a 2.5-inch U.2 form factor and connects via a PCIe 3.0 NVMe interface. The drive targets servers and workstations that need consistent low-latency storage.
Under sustained operation the drive delivers up to 2400Mbps sequential read and up to 2000Mbps sequential write. Random performance reaches up to 550000IOPS for 4KB reads and up to 50000IOPS for 4KB writes. Active power draw is rated at 18 W within an operating range of 0 to 70 °C. MTBF is specified at 2000000 hours.
The 2.5-inch U.2 form factor fits standard hot-swap bays and backplanes that accept U.2 connectors. Installation requires a compatible U.2 port or an appropriate adapter cable. Common issues include insufficient airflow for the 18 W power envelope and using a backplane that does not support PCIe 3.0 NVMe signalling.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Intel |
| Product line | DC P4800X |
| Part number | SSDPE21K375GA |
| Total capacity | 373 GB |
| Product type | Internal Solid State Drive (SSD) |
| Performance | |
| Sustained sequential read rate | Up to 2,400 Mbit/s |
| Sustained sequential write rate | Up to 2,000 Mbit/s |
| Random read (4K) | Up to 550,000 IOPS |
| Random write (4K) | Up to 50,000 IOPS |
| Ports & slots | |
| Interface type | PCI e 3.0 NVMe |
| Power | |
| Active power draw | 18 W |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Environment & compliance | |
| Operating temperature range | 0–70 °C |
| More details | |
| Mean time between failures | 2,000,000 h |
The drive consumes 18 W when active and is rated for an operating temperature range of 0 to 70 °C, so plan airflow to keep the 2.5" bay within those limits during all-day workloads.
No, the SSDPE21K375GA uses a U.2 connector and requires a U.2 backplane or a PCIe 3.0 x4 adapter card; an M.2 slot will not accept the drive mechanically or electrically.
It will operate but the link negotiates to PCIe 2.0 x4, halving the available bandwidth and reducing the 2400 Mbps sequential read and 550000 IOPS random read figures accordingly.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?