We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White ultra-thin Cat6a patch cable with gold RJ45 connectors, 3 ft

Intellinet Network Solutions

Intellinet Cat6a U/UTP Slim Patch Cable 3 ft White

SKU CH-20S3-02R68

Cat6a slim patch cable carries 10 Gbps at 500 MHz over 3 ft with pure copper conductors, gold-plated RJ45 contacts, snag-free boots and unshielded U/UTP construction

  • Cable category6A
  • First connectorRJ45
  • Second connectorRJ45
  • Product typeNetwork Ethernet Cables
  • Overall length3 ft (0.91 m)
  • Product colorWhite
  • 10 Gbps data rate with 500 MHz bandwidth
  • 100 % bare copper conductors for reliable conductivity
  • Gold-plated RJ45 contacts resist corrosion
  • Snag-free boots protect connectors during pulls
  • Ultra-slim stranded design eases dense cabinet routing

Compact 3 ft Cat6a patch cable

This 3 ft white Cat6a U/UTP cable supports 10 Gbps data rates at frequencies up to 500 MHz. It uses 100 % bare copper conductors and gold-plated RJ45 contacts for reliable conductivity. The slim 30 AWG stranded construction makes it easy to route in tight spaces. It is certified to ISO/IEC 11801 and EN 50173-1 Class EA.

Sustained 10 Gbps throughput and PoE++ support

The pure copper cores maintain signal integrity over the full length during continuous 10 Gbps traffic. Gold-plated contacts resist corrosion that can degrade performance over time. The cable handles all PoE standards up to IEEE 802.3bt Type 4 without overheating. Snag-free boots protect the latch during repeated re-seating in dense panels.

Check connector spacing

The ultra-thin jacket reduces bulk but may not fit RJ45 ports with very tight side-by-side clearance. Verify that your patch panel or switch accepts the smaller diameter. Both T568A and T568B colour codes are supported, so match the existing wiring standard in your installation. No shield is present, so avoid routing alongside high-voltage power cables.

How it compares

Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.

Price $7.99
Cheaper than about 80% of the 9,945 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameIntellinet Network Solutions
Product typeNetwork Ethernet Cables
Product colorWhite
Connectivity
Cable category6A
Ports & slots
First connectorRJ45
Second connectorRJ45
Size & build
Overall length3 ft (0.91 m)
ShieldingNo

Questions about this item

Does the 30 AWG stranded construction make the cable run hotter during all-day PoE++ loads?

The pure bare copper conductors and 500 MHz Cat6a rating handle IEEE802.3bt power delivery without excess heat, and the slim profile improves airflow in dense cabinets.

Will my existing RJ45 wall plates and switch ports accept the snag-free boots on this cable?

Yes, the RJ45 connectors follow the standard 8P8C form factor and are fully compatible with T568A and T568B wired outlets and any Gigabit or 10G Ethernet port.

Can I mix this Cat6a slim patch cord with older Cat5e or Cat6 cables in the same 10G link?

The link will negotiate to the lowest category present, so a Cat5e segment limits the run to 1 Gbps while the Cat6a portion remains certified for 10 Gbps at 500 MHz.

More in Ethernet & LAN Cables

Similar items