We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua duplex fiber patch cable with LC connectors on both ends, 1.5 m long

Intellinet Network Solutions

Intellinet Network Solutions 1.5 m LC/LC OM4 Duplex Aqua 50/125 BIMMF

SKU CH-H6TS-SW0BN

A 1.5 m aqua duplex patch cable with LC/LC UPC connectors, OM4 50/125 µm bend-insensitive multimode fibre for 10, 40 and 100 GbE links

  • First connectorLC
  • Second connectorLC
  • Product typeFiber
  • Overall length1.5 m
  • Product colorAqua Blue
  • Key features50/125 µm, Bend Insensitive Multimode Fiber (BIMMF), UPC
  • OM4 multimode fiber supports 10G, 40G and 100G Ethernet speeds
  • UPC connectors deliver better surface finish and improved return loss
  • Bend-insensitive design reduces attenuation when cables are bent or twisted
  • Corning ultra-pure glass fiber provides low attenuation and high bandwidth
  • 5 m duplex LC/LC length suits interconnect and cross-connect applications

Ready for 40 GbE and 100 GbE links

This 1.5 metre duplex patch cord uses OM4 multimode fibre with LC/UPC connectors at both ends. The aqua jacket identifies the OM4 grade and the 50/125 µm core/cladding dimensions. It is built for short-to-medium runs inside entrance facilities, telecommunications rooms and data centres. Bend-insensitive fibre reduces loss when the cable is routed around tight corners.

Test report ships in the box

Every unit arrives with its own factory test report confirming insertion loss and return loss performance. The report lets installers verify the link budget before the cable is pulled into service. No separate software or licence is required to read the document. The Corning ultra-pure glass construction supports the specified bandwidth without additional components.

Simple push-pull LC mating

LC connectors snap into standard SFP, SFP+ and QSFP transceiver ports with a click. The 2.0 mm jacket is flexible enough for dense patch panels but stiff enough to hold shape in cable managers. UPC polish gives low return loss, yet dirty end-faces remain the most common cause of failed links — clean both ferrules before mating. OFNR rating means the cable can run in riser spaces without conduit.

How it compares

Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.

Price $12.99
Cheaper than about 60% of the 9,945 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameIntellinet Network Solutions
Model nameOM4 Multimode Duplex
Product typeFiber
Product colorAqua Blue
Ports & slots
First connectorLC
Second connectorLC
Size & build
Overall length1.5 m
ShieldingNo

Questions about this item

Will the LC connectors need re-polishing after repeated matings?

The UPC (Ultra Physical Contact) finish on the LC connectors provides a superior surface that resists degradation; each cable ships with a test report confirming return-loss performance, and the bend-insensitive multimode fiber further reduces stress on the end faces during handling.

At what distance does OM4 bandwidth limit a 40 Gbps link?

OM4 multimode fiber supports 40 Gbps Ethernet up to 100 metres; this 1.5 metre patch cord is well within that reach, so the cable itself will not be the limiting factor.

Does the aqua jacket add heat or require extra power when run continuously?

The passive duplex patch cord has no active components, draws no power and generates no heat; its 2.0 mm OFNR jacket simply carries light between LC connectors without affecting temperature or energy use.

More in Ethernet & LAN Cables

Similar items