We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua duplex fiber patch cable with LC connectors on both ends 12 m length

Intellinet Network Solutions

Intellinet Network Solutions 12 m LC to LC UPC OM3 Duplex Aqua 50/125 BIMMF 39 ft

SKU CH-4Y38-601DT

12 m LC-to-LC duplex OM3 multimode patch cable with UPC connectors, bend-insensitive 50/125 µm Corning fiber, OFNR rated, aqua jacket

  • First connectorLC
  • Second connectorLC
  • Product typeFiber
  • Overall length12 m
  • Product colorAqua Blue
  • Key features50/125 µm, Bend Insensitive Multimode Fiber (BIMMF), UPC
  • UPC connectors deliver improved return loss for reliable links
  • OM3 multimode fibre supports 10G, 40G and 100G Ethernet speeds
  • Bend-insensitive design reduces attenuation when cables are twisted or bent
  • Corning ultra-pure glass provides low attenuation and high bandwidth
  • Each cable includes a factory test report for verified performance

12 metre LC duplex OM3 patch cable

This 12 metre duplex patch cable uses OM3 multimode fibre with LC UPC connectors on both ends. The aqua jacket identifies the OM3 grade and the 2.0 mm diameter suits standard patch panels. It is built with Corning ultra-pure glass and bend-insensitive multimode fibre for durable routing.

Suited for 10G, 40G and 100G short-range links

The cable is intended for interconnect and cross-connect runs in data centres, telecommunications rooms and entrance facilities. It is not for buyers who need single-mode reach, armoured outdoor cable, or a different connector type such as SC or MPO.

Bend-insensitive multimode fibre with UPC polish

The bend-insensitive design reduces attenuation when the cable is routed around tight corners. UPC connectors provide low return loss and each unit ships with a factory test report confirming performance.

How it compares

Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.

Price $15.99
Typical for this category: the median of 9,945 items is $14.99.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameIntellinet Network Solutions
Model nameOM3 Multimode Duplex
Product typeFiber
Product colorAqua Blue
Ports & slots
First connectorLC
Second connectorLC
Size & build
Overall length12 m
ShieldingNo

Questions about this item

What LC connector spacing and jacket diameter does the 12 m duplex cable require in a patch panel?

The duplex cable uses two LC connectors on each end and a 2.0 mm jacket, so the panel must accept standard LC duplex spacing and a 2.0 mm cable entry.

How do you seat the UPC LC connectors without damaging the ferrule end-face?

Align the keyed LC connector, push straight in until the latch clicks, and never twist or rock the ferrule — twisting scratches the UPC polish and raises return loss.

When should the OM3 bend-insensitive fiber be replaced if attenuation climbs?

Re-test with an OTDR or loss test set; if measured loss exceeds the original test-report baseline for 50/125 µm OM3 at the installed length, replace the cable.

More in Ethernet & LAN Cables

Similar items