We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black box with volume knob, optical, USB and Bluetooth 5.0 inputs, RCA and 3.5mm outputs

Jansicotek

Jansicotek 192kHz DAC Bluetooth 5.0 Audio Video Converter

SKU CH-61FK-H93VH

Converts optical, USB or Bluetooth 5.0 audio to analogue RCA and 3.5 mm outputs at up to 192 kHz 24-bit with a 125 mW headphone amp

  • First connector1 x SPDIF & USB & Bluetooth Receiver Input
  • Second connector1 x L/R RCA & 3.5 mm Audio Jack Output
  • Product typeDigital to Analog Audio Converter
  • In the box1 x Digital to analog audio converter 1 x USB power cable 1
  • High-resolution audio with 192 kHz 24-bit DAC conversion
  • Bluetooth 5.0 streaming for wireless playback from phones or tablets
  • Three digital inputs — optical, USB and Bluetooth — feed one converter
  • Simultaneous RCA and 3.5 mm analogue outputs for amplifier and headphones
  • 125 mW per channel headphone amplifier drives 16–300 ohm loads

Versatile 192kHz DAC Converter

The Jansicotek unit converts optical SPDIF USB and Bluetooth 5.0 sources into analogue L/R RCA and 3.5 mm jack outputs simultaneously. A built-in DAC chip handles 24 bit sampling at rates of 32 44.1 48 96 and 192 kHz accepting PCM and LPCM formats. It is aimed at listeners who want to connect modern digital sources to a legacy amplifier or powered speakers without replacing the amplifier.

Replaces Direct Analogue Wiring

It upgrades a setup that currently relies on a TV or source device with only a 3.5 mm or RCA line-out by adding optical USB and wireless Bluetooth 5.0 inputs. The jump is worthwhile when the source lacks analogue outputs or when a cleaner digital-to-analogue conversion stage is desired. Buyers who need multi-channel surround decoding or HDMI audio extraction will not be served by this stereo-only converter.

Fits Between Source And Amplifier

The converter sits between a digital source and any amplifier or active speakers with RCA or 3.5 mm inputs and draws power from the included USB cable. A front-panel volume knob and the supplied IR remote control output level directly on the unit. Headphones from 16 to 300 ohms can be driven at 125 mW per channel into 32 ohms. No external power supply or software driver is required.

How it compares

Measured against everything we stock in Video Signal Converters, at today’s prices. Recalculated every night.

Price $20.99
Pricier than about 60% of the 1,459 comparable items (median $17.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product typeDigital to Analog Audio Converter
Audio & video
SoundYes
Ports & slots
First connector1 x SPDIF & USB & Bluetooth Receiver Input
Second connector1 x L/R RCA & 3.5 mm Audio Jack Output
In the box
In the box1 x Digital to analog audio converter
1 x USB power cable
1 x IR Remote Control
1 x User Manual

Questions about this item

What power connection does the 192kHz DAC need to operate?

The unit is powered through the included USB power cable, so a spare USB port or a 5 V USB charger is all that is required.

Which input should I select first when setting up Bluetooth 5.0 pairing?

Press the input button until the LED shows Bluetooth mode, then put your phone or transmitter into pairing mode; the converter will connect automatically.

What headphone impedance range is supported for long‑term use?

The built‑in amplifier is rated for 16 to 300 ohm headphones, so any model within that range can be used without risk of damage.

More in Video Signal Converters

Similar items