Jansicotek A0108 DisplayPort cable 6.6 ft 80 Gbps 16K@60Hz
- 6.6 ft (2.01 m)
- DisplayPort Cable
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Transmits 16K at 60 Hz and 4K at 240 Hz over a 10 ft triple-shielded copper link with 80 Gbps bandwidth
Cable Length 10 Feet
The Jansicotek A0108 is a 10 ft DisplayPort 2.1 cable rated for 80 Gbps bandwidth. It carries 16K resolution at 60 Hz with DSC, 8K at 120 Hz, and 4K at up to 240 Hz. The male-to-male connectors suit monitors and graphics cards that implement the DP 2.1 interface.
Your graphics card and monitor must both expose DisplayPort 2.1 ports to reach the advertised refresh rates and resolutions. Older DP 1.4 or 1.2 devices will work but fall back to their own limits. Verify that your GPU drivers and display firmware support the target mode before ordering.
Triple shielding and solid copper conductors protect signal integrity over the full length. The braided jacket resists kinks during routing behind desks or through cable-management channels. Secure latching connectors prevent accidental disconnects when moving the display or adjusting the stand.
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Jansicotek |
| Model name | A0108 |
| Product type | DisplayPort Cable |
| Product color | Black |
| Performance | |
| Rated speed | Test Value |
| Display | |
| Refresh frequency | 16K(15360 × 8640) 60 Hz with DSC, 8K 120 Hz, 4K 240 Hz/165 Hz/120 Hz/144 Hz Support |
| Ports & slots | |
| Connector count | 1 |
| Source connector | 1 x DisplayPort2.1 |
| Destination connector | 1 x DisplayPort2.1 |
| Connector details | DisplayPort to DisplayPort 2.1 Cable 16K@60 Hz |
| Connector gender | Male to Male |
| Size & build | |
| Overall length | 10 ft (3.05 m) |
| Cable length | 10 ft (3.05 m) |
| Cable shielding | Triple-shielded |
| Conductor type | Solid Copper Conductor |
| Build details | Test123 |
| Compatibility | |
| Supported platforms | Works with Windows Vista |
Other versions of this model
The box contains the 10 ft male-to-male DisplayPort 2.1 cable with triple shielding and solid copper conductors. No separate adapters or power supplies are required.
This model is a single 10 ft DisplayPort 2.1 cable rated for 80 Gbps bandwidth. Choose it when you need that length and the 16K@60Hz, 8K@120Hz or 4K@240Hz headroom.
It enables the full DisplayPort 2.1 UHBR20 link so you can run 16K at 60 Hz with DSC, 8K at 120 Hz or 4K at 240 Hz without compression artefacts, provided both source and display support those modes.
More in DisplayPort Monitor Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?