We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black rectangular HDMI splitter with three ports

Jansicotek

Jansicotek OZF10 1x2 HDMI Splitter 4K 60Hz

SKU CH-EEXH-53E78

Splits one HDMI source to two displays at up to 4K 60Hz with 10.5Gbps bandwidth and HDCP 1.4 support

  • Port count2
  • Adapter typeHDMI
  • Input ports1 HDMI
  • Output ports2 HDMI
  • Maximum supported resolutions3840 × 2160
  • Bandwidth rating10.5 Gbit/s
  • One HDMI source duplicated to two displays simultaneously
  • 4K at 60 Hz for sharp Ultra HD picture
  • 5 Gbps bandwidth carries high-resolution video
  • 1-channel digital audio formats passed through
  • Works with 1080p, 720p and 480p legacy sources

Signal duplication for two displays

The Jansicotek OZF10 is a one‑input, two‑output HDMI splitter built for users who need the same 4K source shown on two screens at once. It suits living‑room setups, digital signage or dual‑monitor mirroring where extended desktop mode is not required. The unit ships with a USB power cable and draws power from any standard 5 V port.

Thermals noise and power

The aluminium enclosure passively dissipates the few watts the splitter consumes, so it runs silently without a fan. Power is supplied through the included USB cable, eliminating the need for a separate wall adapter and keeping cable clutter low. Typical draw stays well within the limits of a TV or monitor USB service port.

Mirror only no extended mode

This splitter duplicates video and audio identically to both outputs and does not support extended or independent display modes. Buyers who need separate content on each screen should choose a graphics card or a matrix switch instead.

How it compares

Measured against everything we stock in HDMI & Video Splitters, at today’s prices. Recalculated every night.

Price $10.99
Cheaper than about 90% of the 1,127 comparable items (median $20.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Product lineOZF10
Model nameOZF10
Part numberOZF10
Product typeHDMI Splitters
Adapter typeHDMI
Product colorBlack
Performance
Bandwidth rating10.5 Gbit/s
Display
Maximum supported resolutions3840 × 2160
Audio & video
SoundYes
Ports & slots
Port count2
Input ports1 HDMI
Output ports2 HDMI
Size & build
Product dimensions5.59 × 3.15 × 1.26 in
Product weight3.2 oz
In the box
Units per package1
In the box1 × 4K@60 Hz HDMI splitter 1 in 2 out
1 x USB cable
1 x User Manual

Questions about this item

How do I install the OZF10 splitter and what step is often missed?

Connect the HDMI source to the single input, then link both displays to the two outputs. The step people miss is plugging the supplied USB cable into a 5 V USB port or charger to power the unit; without it the 10.5 Gbps 4K 60 Hz signal will not pass.

What maintenance or replacement will the OZF10 need later?

The splitter itself has no moving parts or user-serviceable items. Over time you may need to replace the HDMI cables if they are bent or exceed the 5 m limit for 4K or the 8 m limit for 1080p, or swap the USB power cable if it becomes damaged.

What limit appears first when the OZF10 runs continuously at 4K 60 Hz?

The 10.5 Gbps bandwidth ceiling is the first hard limit; it caps the splitter at 4K 60 Hz 4:2:0 8-bit. Pushing higher colour depth or frame rate would exceed the HDMI 2.0 spec the device implements.

More in HDMI & Video Splitters

Similar items