We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black rectangular RJ45 splitter with three ports and short USB power lead

Jansicotek

Jansicotek OZHW2 Gigabit Ethernet Splitter 1 to 3 with USB Power Cable

SKU CH-DN9N-NX9N6

Splits one Ethernet cable into three 1000 Mbps ports powered by an 80 cm USB cable

  • Adapter typeGigabit RJ45 Ethernet Splitter 1 to 3
  • Connector typeRJ45
  • Product typeEthernet Splitter 1 to 3 RJ45 Network Adapter
  • DetailsImportant Note: This Gigabit RJ45 Ethernet Splitter equipped
  • Key featuresExpand your network and add network devices with this 3-port
  • Product dimensions4.02 × 3.74 × 1.06 in
  • Share one Ethernet line across three devices simultaneously with included USB power cable
  • Achieve up to 1000 Mbps throughput per cable set without signal crosstalk
  • Works with Cat5 through Cat8 cables for ADSL, switches, routers, TVs and computers
  • Plug-and-play design needs no software setup, just connect the 80 cm USB cable for power
  • Compact aluminium housing measures 4.02 x 3.74 x 1.06 inches and weighs 3.2 ounces

Gigabit RJ45 Ethernet Splitter 1 to 3

The Jansicotek OZHW2 splits a single Ethernet line into three RJ45 ports so three devices can share one wired connection at the same time. It draws power from an included USB cable and supports Cat5 through Cat8 cabling. This suits home or small-office setups that need extra wired ports without running new cables.

Upgrade from a single-port wall jack

When a room only has one Ethernet drop, this splitter turns it into three active ports for computers, TVs, set-top boxes or switches. The jump is worth it if you need simultaneous 1000 Mbps throughput on each port and cannot install a full switch or pull additional wiring. It will not help buyers who want more total bandwidth than the upstream link provides.

Plug-and-play with USB power

Connect the USB cable to a 5 V socket or adapter, link the incoming cable to the input port, then plug up to three devices into the outputs. No driver or configuration is required. The unit cannot operate without the USB power connection, so a missing or loose cable is the most common reason it appears dead on arrival. The 80 cm cord limits placement to within 2.6 ft of a USB power source.

How it compares

Measured against everything we stock in HDMI & Video Splitters, at today’s prices. Recalculated every night.

Price $21.99
Pricier than about 55% of the 1,127 comparable items (median $20.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Model nameOZHW2
Product typeEthernet Splitter 1 to 3 RJ45 Network Adapter
Adapter typeGigabit RJ45 Ethernet Splitter 1 to 3
Ports & slots
Connector typeRJ45
Size & build
Product dimensions4.02 × 3.74 × 1.06 in
Product weight3.2 oz
In the box
In the boxRJ45 Ethernet Splitter X1
USB Power Cord X1

Questions about this item

How much clearance does the 4.02 x 3.74 x 1.06 inch splitter need behind a desk or panel?

The aluminium housing measures 4.02 by 3.74 by 1.06 inches, so allow at least that depth plus the 80 cm USB cable bend radius for a tidy installation.

The 80 cm USB power cable must be plugged in before any network cables — what happens if I skip that step?

The splitter cannot operate without the USB power connection; connect the 80 cm cable to a stable 5 V source first, then attach the three RJ45 patch cords.

Does the RJ45 splitter require any firmware updates or fan cleaning over time?

No firmware or moving parts exist; just keep the aluminium vents free of dust and reseat the RJ45 plugs if a link drops.

More in HDMI & Video Splitters

Similar items