Jansicotek SATA III 3-pack 6 Gbps straight 180° locking 18 in cable
Three-pack of SATA III data cables with straight locking connectors, 18 inches long, supporting up to 6 Gbps transfer rates
- Product colorBlack
- 6 Gbps data rate ready with SATA 3.0 support
- Three cables in one pack for spares or RAID builds
- Straight 180° connectors with locking latches prevent accidental disconnects
- 18 in length suits typical desktop drive bays
- Backward compatible with SATA I and II drives
Three-pack SATA III data cables
This set contains three 18-inch SATA III cables with straight 180-degree connectors and locking latches. They link internal Serial ATA hard drives, SSDs and optical drives to motherboards or host controllers. Each cable handles the data path only; drives must receive power separately. The black cables are sold new in a cost-effective triple pack.
Builders adding multiple drives
The three-cable bundle suits anyone installing several SATA storage devices or building a RAID array who wants matching cables with secure latching connectors. It is not for users who need angled plugs for tight clearance, right-angle connectors for stacked ports, or cables that also carry power to the drive. Buyers requiring longer runs or different connector orientations should look elsewhere.
6 Gbps SATA Revision 3.0 interface
The decisive specification is the SATA 3.0 interface rated for up to 6 Gbps data transfer, backward compatible with SATA I and II devices. Actual throughput depends on the connected drive and controller capabilities. This single interface rating determines whether the cable matches the performance level of the storage hardware being installed.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 70% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Black |
Questions about this item
How do I install the 180-degree straight SATA cables so the locking latches actually engage?
Align each straight connector with the motherboard and drive ports, push straight in until the latch clicks, then pull gently to confirm it is locked; the 180-degree orientation means the cable runs parallel to the board, so route it before seating the second end.
What maintenance or replacement will the three-pack of SATA III cables need over time?
The cables are passive with no moving parts beyond the latches; inspect the latch tabs if a drive is swapped repeatedly — replace any cable whose latch no longer clicks securely.
What limit appears first during sustained transfers with these 6 Gbps SATA cables?
The practical ceiling is the 6 Gbps SATA 3.0 interface itself; actual throughput will be lower and is capped by the slowest connected drive or controller.
More in SATA & eSATA Drive Cables
Similar items
LUOM US217 SATA III cable 18 in 3-pack straight locking latch
- 1 in (2.54 cm)
- SATA III
Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair
- 1.64 ft (0.5m)
- SATA II
EN-Labs 5PKSATAIII60CMBK 5-pack SATA 3.0 6Gbps locking cable 24" black
- 2 ft (0.61 m)
- SATA Data Cable
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
Sabrent CB-SFK3 SATA III 6 Gbps locking data cable 3-pack 20 in
- Optical
- SATA





