TRENDnet TK-207K 2-Port USB KVM Switch
- 1 x USB (Type A), 1…
- 2 x USB Keyboard/Mo…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects four computers to one monitor at up to 8K 60 Hz and shares four USB 3.0 peripherals with push-button or IR remote switching
The Jansicotek SW241-HD lets four computers or laptops share one HDMI monitor and a single keyboard and mouse set. Four USB 3.0 ports on the switch provide peripheral access for each connected system. Push-button switching and an included IR remote give two ways to change the active computer. The unit is driver-free and works with Windows, Linux and UNIX platforms.
The metal enclosure dissipates heat without a fan, so operation stays silent on the desk. A 12 V 1 A external supply powers the switch and the four USB 3.0 downstream ports, removing load from the host computers. Auto-scan cycles through the four inputs every three seconds when enabled. Front-panel LEDs show which port is active at a glance.
All HDMI and USB connectors face the rear, routing cables away from the workspace. The package includes four USB 3.0 A-to-A cables, the power adapter, an IR extender cable, the remote control and a manual. The switch supports resolutions up to 8K at 60 Hz, 4K at 120 Hz and 1080p at 240 Hz. Buyers needing more than four computer ports or multiple simultaneous monitor outputs will need a different solution.
Measured against everything we stock in KVM Switches & Rack Consoles, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | Jansicotek |
| Product line | SW241-HD |
| Model name | SW241-HD |
| Product type | HDMI, USB |
| Display | |
| Supported video resolution | 8K 60 Hz |
| Ports & slots | |
| PC connections | HDMI, USB |
| Computer ports | 4 Port - USB 3.0 HDMI |
| Monitor ports | 1 Port |
| USB support | With USB support |
| Size & build | |
| Product dimensions | 5.43 × 5.35 × 1.46 in |
| Product weight | 9.52 oz |
| In the box | |
| In the box | You will receive a 1 × 4 in 1 out KVM switcher, 4*USB 3.0 A to A cables, 1 × 12V1A external power supply, 1*IR cable, 1*remote control (excluding battery), and 1*user manual. |
| More details | |
| Switching method | Push Buttons/Desktop Controller |
| Auto-scan interval | 3 seconds |
| Status lights | Yes |
Plug each computer's HDMI and USB 3.0 cables into the four rear ports, connect the monitor to the single HDMI output, attach the 12V 1A power adapter, then use the push buttons or IR remote to switch; the step most often missed is powering the unit before linking the computers.
The IR remote uses a replaceable coin cell — swap it when switching range shortens; keep the rear vents clear of dust and reseat the four HDMI and USB 3.0 cables if signal dropouts appear after frequent switching.
The 12V 1A external supply caps total USB 3.0 downstream current, so sustained 8K 60 Hz video with all four peripheral ports loaded can trigger power throttling before any thermal limit is reached.
More in KVM Switches & Rack Consoles
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?