We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB-C to DisplayPort cable, 3.3 ft, male connectors, triple-shielded

Jansicotek

Jansicotek TJ-A055 USB-C to DisplayPort 1.4 cable 3.3 ft

SKU CH-R58G-V3VZ2

Connects a USB-C source to a DisplayPort 1.4 monitor at up to 8K 60 Hz or 4K 144 Hz over 3.3 ft

  • Refresh frequency8K - 7680 × 4320@60 Hz 5K - 5120 × 2880@60 Hz 4K - 3840 × 21
  • Rated speedTest Value
  • Cable length3.3 ft (1.01 m)
  • Connector count1
  • Source connector1 x USB Type-C
  • Destination connector1 x DisplayPort 1.4
  • Delivers 8K at 60 Hz with 32.4 Gbps bandwidth
  • Supports 4K at 144 Hz and 2K at 240 Hz for gaming
  • Triple-shielded solid copper construction reduces signal loss
  • Works from USB-C or Thunderbolt source to DisplayPort display
  • Backward compatible with DisplayPort 1.3, 1.2 and 1.1

USB-C to DisplayPort 1.4 cable 3.3 ft

This Jansicotek cable connects a USB-C or Thunderbolt 3/4 source to a DisplayPort 1.4 display. It is built for users who need a direct link from a laptop, tablet or phone to a high-resolution monitor without adapters. The 3.3 ft length suits desktop setups where the source sits close to the screen.

Upgrade from older DisplayPort or HDMI links

The cable replaces connections limited to DisplayPort 1.2 or earlier, or HDMI 2.0, when the source and display both support DisplayPort 1.4. The jump is worth it when you need 8K at 60 Hz, 4K at 144 Hz or 2K at 240 Hz with 10-bit HDR. It also adds DSC 1.2 compression and HDCP 2.2 for protected content.

Capacity and headroom

Bandwidth reaches 32.4 Gbps, enabling 7680x4320 at 60 Hz, 5120x2880 at 60 Hz, 3840x2160 at 144 Hz and 2560x1440 at 240 Hz. Triple shielding and solid copper conductors keep the signal clean at those rates. The unidirectional design means it cannot drive a USB-C display from a DisplayPort source, and it does not carry USB data or power.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $10.99
Cheaper than about 90% of the 3,804 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Model nameTJ-A055
Product typeDisplayPort Cable
Product colorBlack
Performance
Rated speedTest Value
Display
Refresh frequency8K - 7680 × 4320@60 Hz
5K - 5120 × 2880@60 Hz
4K - 3840 × 2160@144 Hz, 120 Hz, 60 Hz
2K - 2560 × 1440@240 Hz, 165 Hz, 144 Hz, 120 Hz, 60 Hz
Ports & slots
Connector count1
Source connector1 x USB Type-C
Destination connector1 x DisplayPort 1.4
Connector detailsUSB C to DisplayPort 1.4 Cable 8K@60 Hz
Connector genderMale to Male
Size & build
Overall length3.3 ft (1.01 m)
Cable length3.3 ft (1.01 m)
Cable shieldingTriple-shielded
Conductor typeSolid Copper Conductor
Build detailsTest123
Compatibility
Supported platformsWorks with Windows Vista

Other versions of this model

5 more in the same range

Questions about this item

What clearance does the 3.3 ft cable need behind the monitor?

The 3.3 ft length requires enough slack behind the display for the male DisplayPort 1.4 connector and the USB-C plug to sit without sharp bends.

Which port must the USB-C end plug into for video output?

Connect the USB-C end to a Thunderbolt 3 or Thunderbolt 4 port that supports DisplayPort Alt Mode; the cable is unidirectional from source to display.

When should the cable be replaced if the picture degrades?

Replace it if flickering, signal loss or resolution drops appear, as the triple-shielded solid copper conductors do not have user-serviceable parts.

More in DisplayPort Monitor Cables

Similar items