We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black DisplayPort 2.1 cable with male connectors on both ends, 3.3 ft long, triple-shielded with aluminum shells

Jansicotek

Jansicotek TJ-A285BK DisplayPort 2.1 cable 3.3 ft 80 Gbps 16K@30Hz 8K@120Hz 4K@240Hz 2K@360Hz

SKU CH-SQJH-C27K7

A 3.3 ft DisplayPort 2.1 cable carrying 80 Gbps for 16K at 30 Hz, 8K at 120 Hz, 4K at 240 Hz and 2K at 360 Hz

  • Refresh frequency16K@30 Hz, 8K@60 Hz/120 Hz, 4K@144 Hz, 4K@165 Hz, 2K@360 Hz
  • Rated speedTest Value
  • Cable length3.3 ft (1.01 m)
  • Connector count1
  • Source connector1 x DisplayPort2.1
  • Destination connector1 x DisplayPort2.1
  • 80 Gbps bandwidth drives 16K@30 Hz gaming
  • Triple-shielded 28 AWG copper resists EMI interference
  • Aluminium shell dissipates heat during long sessions
  • 15 000-bend lifespan withstands frequent repositioning
  • Backward compatible with DP 1.0 through 2.0

3.3 ft DisplayPort 2.1 cable for 16K

This 3.3 ft DisplayPort 2.1 cable carries up to 80 Gbps bandwidth. It supports resolutions up to 16K at 30 Hz, 8K at 120 Hz, 4K at 240 Hz and 2K at 360 Hz. The male-to-male connectors suit graphics cards and gaming monitors with DisplayPort inputs. It is built for high-performance gaming and ultra-high-definition video streaming.

Plug-and-play with a buckle-free groove for tight

The cable uses a groove design instead of a traditional latch, allowing easy removal in confined areas. Triple shielding and a 28 AWG tinned copper conductor resist EMI interference. The 24K gold-plated connectors ensure artifact-free audio and video transmission. No drivers or software are required for operation.

80 Gbps bandwidth decides compatibility

The 80 Gbps rating enables the highest listed refresh rates and resolutions, including 16K at 30 Hz with DSC and 4K at 240 Hz. Backward compatibility covers DisplayPort 2.0, 1.4, 1.3, 1.2, 1.2a, 1.1 and 1.0. Buyers needing longer runs or higher uncompressed bandwidths should verify length limits elsewhere.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $10.99
Cheaper than about 90% of the 3,804 comparable items (median $15.99).
Refresh frequency 16K@30 Hz, 8K@60 Hz/120 Hz, 4K@144 Hz, 4K@165 Hz, 2K@360 Hz
Lower than about 90% of the 648 comparable items (median 60 Hz).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Model nameTJ-A285BK
Product typeDisplayPort Cable
Product colorBlack
Performance
Rated speedTest Value
Display
Refresh frequency16K@30 Hz, 8K@60 Hz/120 Hz, 4K@144 Hz, 4K@165 Hz, 2K@360 Hz
Ports & slots
Connector count1
Source connector1 x DisplayPort2.1
Destination connector1 x DisplayPort2.1
Connector detailsDisplayPort to DisplayPort 2.1 Cable 16K@30 Hz
Connector genderMale to Male
Size & build
Overall length3.3 ft (1.01 m)
Cable length3.3 ft (1.01 m)
Cable shieldingTriple-shielded
Conductor typeSolid Copper Conductor
Build detailsTest123
Compatibility
Supported platformsWorks with Windows Vista

Other versions of this model

5 more in the same range

Questions about this item

How can I confirm the cable is delivering 80 Gbps and 4K at 240 Hz after I connect it?

Check your GPU control panel or monitor OSD to verify the link is running at 4K 240 Hz with 10-bit colour and DSC 1.2a active; that combination only works when the full 80 Gbps path is established.

What comes in the box and is anything else required to use it?

The package contains the 3.3 ft DisplayPort 2.1 male-to-male cable with 24 K gold-plated connectors and triple shielding; no extra adapters or power are needed — just plug into a DP 2.1 source and display.

Should I choose this 3.3 ft version or a different length for my 16K 30 Hz setup?

This 3.3 ft model is rated for the full 80 Gbps bandwidth that enables 16K at 30 Hz with DSC; longer cables may not sustain that speed, so keep the run at or below 3.3 ft for guaranteed 16K performance.

More in DisplayPort Monitor Cables

Similar items