We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black DisplayPort to DisplayPort optical fibre cable, 164 ft long, gold-plated connectors, TPE jacket

Jansicotek

Jansicotek TJ-A077 DisplayPort cable 1.4 HBR3 8K 60Hz 4K 144Hz 32.4Gbps optical fiber 50m 164ft

SKU CH-JE80-056QJ

Optical-fibre DisplayPort 1.4 cable carries 8K at 60 Hz or 4K at 144 Hz over 50 metres with 32.4 Gbps bandwidth

  • Refresh frequencySupport 4K@144 Hz and 8K@60 Hz( backward compatible with 2K
  • Rated speedSupports up to 32.4 Gbit/s bandwidth.
  • Cable length164 ft (50 m)
  • Connector count1
  • Source connector1 x DisplayPort 1.4
  • Destination connector1 x DisplayPort 1.4

Cable Length 164 ft.

  • 8K 60 Hz visuals over 50 m with optical fibre
  • 4K 144 Hz gaming at 32.4 Gbps bandwidth
  • 24 K gold-plated connectors resist corrosion
  • Hybrid glass and copper construction for stable long runs
  • Backward compatible with 1080p and 2K displays

50-metre optical DisplayPort 1.4 cable

This 164 ft fibre-optic cable carries DisplayPort 1.4 HBR3 signals up to 32.4 Gbps. It supports 8K at 60 Hz and 4K at 144 Hz while remaining backward compatible with 2K and 1080P sources. The hybrid glass-fibre and copper construction is designed for long in-wall runs where copper cables would lose signal integrity.

Gold-plated connectors with directional design

Each end uses a male DisplayPort 1.4 connector with 24 K gold-plated contacts inside a zinc-alloy shell. The TPE jacket resists wear during installation. Because the optical engine is directional, one plug is marked Source and the other Display; reversing them will break the link.

Passive optical link with no external power

The cable draws the small current it needs from the DisplayPort source device, so no separate power supply is required. Fibre transmission eliminates electromagnetic interference and keeps latency low over the full 50 m length. Connector shells stay cool during normal operation because the optical modules consume minimal power.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $85.99
Pricier than about 91% of the 3,804 comparable items (median $15.99).
Refresh frequency Support 4K@144 Hz and 8K@60 Hz( backward compatible with 2K and 1080P resolutions.)
Higher than about 60% of the 648 comparable items (median 60 Hz).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Model nameTJ-A077
Product typeDisplayPort
Product colorBlack
Performance
Rated speedSupports up to 32.4 Gbit/s bandwidth.
Display
Refresh frequencySupport 4K@144 Hz and 8K@60 Hz( backward compatible with 2K and 1080P resolutions.)
Ports & slots
Connector count1
Source connector1 x DisplayPort 1.4
Destination connector1 x DisplayPort 1.4
Connector detailsDisplayPort to DisplayPort( Male to Male)
Connector genderMale to Male
Size & build
Overall length164 ft (50 m)
Cable length164 ft (50 m)
Conductor typeTriple-shielded
Compatibility
Supported platformsCertified for Windows Vista

Other versions of this model

5 more in the same range

Questions about this item

What bandwidth does the DisplayPort 1.4 HBR3 interface cap at on this cable?

The DisplayPort 1.4 HBR3 connection supports up to 32.4Gbps bandwidth, enabling 8K at 60Hz and 4K at 144Hz without compression.

What physical clearance and routing does a 50m hybrid optical cable require?

The 164ft hybrid cable uses a slim TPE jacket with glass fibre and copper conductors, so it bends easily for in-wall runs but must not be kinked or crushed during installation.

How do I install the directional connectors correctly on this fiber cable?

One end is marked Source for the GPU or media player and the other Display for the monitor; reversing them breaks the signal because the optical engines only transmit one way.

More in DisplayPort Monitor Cables

Similar items