We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black DisplayPort fibre-optic cable 164 ft long with gold-plated male connectors on both ends

Jansicotek

Jansicotek TJ-A077 displayport cable 164 ft

SKU CH-SD4K-7HZ2J

A 164 ft fibre-optic DisplayPort 1.4 cable delivering 32.4 Gbps for 8K at 60 Hz or 4K at 144 Hz

  • Refresh frequencySupport 4K@144 Hz and 8K@60 Hz( backward compatible with 2K
  • Rated speedSupports up to 32.4 Gbit/s bandwidth.
  • Cable length164 ft (50 m)
  • Connector count1
  • Source connector1 x DisplayPort 1.4
  • Destination connector1 x DisplayPort 1.4

Cable Length 164 ft.

  • 8K at 60 Hz over 164 ft with zero signal loss
  • 4K at 144 Hz refresh rate for smooth high-resolution gaming
  • 4 Gbps bandwidth meets DisplayPort 1.4 HBR3 spec
  • Hybrid glass fibre and copper construction for stable long runs
  • 24K gold-plated connectors resist corrosion for lasting reliability

164 ft fibre-optic DisplayPort cable

This Jansicotek TJ-A077 cable uses a hybrid glass-fibre and copper construction to carry DisplayPort 1.4 signals over 164 ft. It is built for installers and AV professionals who need a single-cable run between a source and a display without signal boosters.

Suited for permanent in-wall

The directional connectors must be plugged in correctly, so it is not a quick-swap patch cable. Users who need a short, flexible lead for a desk setup or who cannot observe the source-to-display orientation should choose a different cable type.

Handles 32.4 Gbps bandwidth for 8K 60 Hz

At lower resolutions such as 1080p or 1440p the link has ample headroom for high refresh rates. The fixed 164 ft length means there is no slack for shorter runs, and the fibre cores cannot be cut or re-terminated on site.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $88.99
Pricier than about 91% of the 3,804 comparable items (median $15.99).
Refresh frequency Support 4K@144 Hz and 8K@60 Hz( backward compatible with 2K and 1080P resolutions.)
Higher than about 60% of the 648 comparable items (median 60 Hz).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Model nameTJ-A077
Product typeDisplayPort
Product colorBlack
Performance
Rated speedSupports up to 32.4 Gbit/s bandwidth.
Display
Refresh frequencySupport 4K@144 Hz and 8K@60 Hz( backward compatible with 2K and 1080P resolutions.)
Ports & slots
Connector count1
Source connector1 x DisplayPort 1.4
Destination connector1 x DisplayPort 1.4
Connector detailsDisplayPort to DisplayPort( Male to Male)
Connector genderMale to Male
Size & build
Overall length164 ft (50 m)
Cable length164 ft (50 m)
Conductor typeTriple-shielded
Compatibility
Supported platformsCertified for Windows Vista

Other versions of this model

5 more in the same range

Questions about this item

Does my graphics card need a DisplayPort 1.4 output to use this 164 ft cable at 8K@60Hz?

Yes, the cable requires a DisplayPort 1.4 source to deliver 8K at 60 Hz or 4K at 144 Hz over the full 164 ft length.

Will this fiber cable work with my older monitor that only supports 1080p at 60 Hz?

The cable is backward compatible with DP 1.2 and lower resolutions including 1080p, so it will function with your existing monitor.

How can I confirm the link is running at the full 32.4 Gbps after I connect source and display?

Verify in your GPU control panel or monitor OSD that the active mode shows 8K at 60 Hz or 4K at 144 Hz, which indicates the full bandwidth is in use.

More in DisplayPort Monitor Cables

Similar items