Jansicotek TJ-A022 DisplayPort cable 10 m 8K 60 Hz 4K 144 Hz 32.4 Gbps
- 33 ft (10.1 m)
- DisplayPort
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 10-metre fibre-optic DisplayPort 1.4 cable carrying 8K at 60 Hz or 4K at 144 Hz with 32.4 Gbps bandwidth
Cable Length 33 Feet
This 33-foot hybrid cable uses four pure-glass fibres plus oxygen-free copper to carry DisplayPort 1.4 signals up to 32.4 Gbps. It is aimed at installers and enthusiasts who need 8K at 60 Hz or 4K at 144 Hz over distances that copper cables cannot reliably cover. The 24-carat gold-plated connectors and TPE jacket are built for in-wall routing and repeated mating cycles.
Each connector is marked Source or Display and the link only works when oriented correctly. If the ends are reversed the signal will not pass, so the installer must follow the labelled direction during cable pulls and terminations.
The fibre cores carry light instead of electricity, so the cable generates no measurable heat and draws no auxiliary power. There are no active electronics to whine or fail, making the link silent and thermally neutral in normal operation.
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Jansicotek |
| Model name | TJ-A077 |
| Product type | DisplayPort |
| Product color | Black |
| Performance | |
| Rated speed | Supports up to 32.4 Gbit/s bandwidth. |
| Display | |
| Refresh frequency | Support 4K@144 Hz and 8K@60 Hz( backward compatible with 2K and 1080P resolutions.) |
| Ports & slots | |
| Connector count | 1 |
| Source connector | 1 x DisplayPort 1.4 |
| Destination connector | 1 x DisplayPort 1.4 |
| Connector details | DisplayPort to DisplayPort( Male to Male) |
| Connector gender | Male to Male |
| Size & build | |
| Overall length | 33 ft (10.1 m) |
| Cable length | 33 ft (10.1 m) |
| Conductor type | Triple-shielded |
| Compatibility | |
| Supported platforms | Certified for Windows Vista |
Other versions of this model
It carries full 8K resolution at 60Hz or 4K at 144Hz without compression artifacts, and falls back to 2K or 1080P if the display requires it.
The DP 1.4 link caps at 32.4Gbps, so 8K is limited to 60Hz and 4K to 144Hz; higher rates would need a newer interface.
Each end uses a male DisplayPort plug with a zinc-alloy shell; the cable is directional, so the Source end must face the GPU and the Display end the monitor.
More in DisplayPort Monitor Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?