Jansicotek TJ-A022 DisplayPort cable 330 ft 8K 60 Hz 32.4 Gbps
- 330 ft (101 m)
- DisplayPort
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 330 ft fiber-optic DisplayPort 1.4 cable supporting 8K at 60 Hz, 4K at 144 Hz, 32.4 Gbps bandwidth, HBR3 and DSC 1.2 for long-distance transmission
Cable Length 330 ft.
The Jansicotek TJ-A077 is a 330 ft fiber-optic DisplayPort 1.4 cable built for ultra-long runs between a graphics card and a display. It carries 8K at 60 Hz or 4K at 144 Hz with HDR10 and DSC 1.2 support. The hybrid glass-fibre and copper construction maintains full 32.4 Gbps bandwidth over the entire length without signal loss.
Copper DisplayPort cables lose integrity past short distances, forcing lower resolutions or unstable links. This fibre cable removes that limit for in-wall installs, projector throws or multi-room setups where the source and sink sit 100 m apart. The upgrade is worth it whenever a copper run would require repeaters or fall back to 1080p.
The cable delivers 32.4 Gbps across the full 330 ft, so 8K 60 Hz and 4K 144 Hz work without compression artefacts. It is backward compatible with 2K and 1080p displays. Runs that need higher bandwidth than HBR3 or distances beyond 330 ft exceed this cable's capability.
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Jansicotek |
| Model name | TJ-A077 |
| Product type | DisplayPort |
| Product color | Black |
| Performance | |
| Rated speed | Supports up to 32.4 Gbit/s bandwidth. |
| Display | |
| Refresh frequency | Support 4K@144 Hz and 8K@60 Hz( backward compatible with 2K and 1080P resolutions.) |
| Ports & slots | |
| Connector count | 1 |
| Source connector | 1 x DisplayPort 1.4 |
| Destination connector | 1 x DisplayPort 1.4 |
| Connector details | DisplayPort to DisplayPort( Male to Male) |
| Connector gender | Male to Male |
| Size & build | |
| Overall length | 330 ft (101 m) |
| Cable length | 330 ft (101 m) |
| Conductor type | Triple-shielded |
| Compatibility | |
| Supported platforms | Certified for Windows Vista |
Other versions of this model
The hybrid cable uses pure glass fiber plus oxygen-free copper inside a wear-resisting TPE jacket sized for standard in-wall conduit; measure the outer diameter before pulling.
One connector is marked Source for the graphics card and the other Display for the monitor; both are male DisplayPort 1.4 and must be inserted in the labelled direction.
The 24K gold-plated contacts resist corrosion and the zinc-alloy shells prevent cracking, so no scheduled cleaning or connector replacement is required under normal use.
More in DisplayPort Monitor Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?