Jansicotek TJ-A055 USB-C to DisplayPort 1.4 cable 10 ft 8K@60Hz 4K@144Hz
- 10 ft (3.05 m)
- DisplayPort Cable
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 3.3 ft DisplayPort 2.0 cable carrying 80 Gbps for 16K at 60 Hz, 8K at 120 Hz, 4K at 240 Hz and 2K at 360 Hz with HDR and triple shielding
This DisplayPort 2.0 cable links a graphics card or laptop to a monitor at up to 16K@60Hz, 8K@120Hz, 4K@240Hz or 2K@360Hz. It suits gamers and creators who need the full 80Gbps bandwidth for high-refresh 4K or 8K panels. Buyers who want more length than 3.3 ft should look elsewhere.
As a passive copper cable it draws no external power and produces no heat or noise. The 28AWG tinned copper conductors and triple shielding keep signal integrity clean at 80Gbps without active electronics. No fan or power adapter is involved.
The single figure that decides fit is the 80Gbps bandwidth rating with DisplayPort 2.0 and HBR3 support. If your source and display both speak UHBR20 you get uncompressed 4K@240Hz or 8K@120Hz; if either tops out at HBR3 the link falls back to lower rates.
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Jansicotek |
| Model name | TJ-A285 |
| Product type | DisplayPort Cable |
| Product color | Green |
| Performance | |
| Rated speed | Test Value |
| Display | |
| Refresh frequency | 16K@60 Hz, 8K@120 Hz, 4K@144 Hz, 4K@165 Hz, 2K@360 Hz |
| Ports & slots | |
| Connector count | 1 |
| Source connector | 1 x DisplayPort2.0 |
| Destination connector | 1 x DisplayPort2.0 |
| Connector details | DisplayPort to DisplayPort 2.0 Cable 16K@60 Hz |
| Connector gender | Male to Male |
| Size & build | |
| Overall length | 3.3 ft (1.01 m) |
| Cable length | 3.3 ft (1.01 m) |
| Cable shielding | Triple-shielded |
| Conductor type | Solid Copper Conductor |
| Build details | Test123 |
| Compatibility | |
| Supported platforms | Works with Windows Vista |
Other versions of this model
Connect the male DisplayPort 2.0 plugs to the source and display, then push each connector until the latch clicks; the step often missed is failing to seat the latch fully, which can cause signal dropouts at 80Gbps.
The triple-shielded 28AWG tinned copper conductors and 24K gold-plated contacts require no scheduled maintenance; replace the cable only if the braided jacket shows wear or the latch mechanism fails to hold.
The 80Gbps bandwidth ceiling is the first limit; driving 4K@240Hz or 2K@360Hz uses DSC 1.2a compression to stay within that ceiling, so sustained use stays within spec without thermal throttling.
More in DisplayPort Monitor Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?