KEHIPI 090600AFA 12V to 5V 3A 15W Power Adapter
A waterproof buck converter steps 8–35 V down to a steady 5 V at 3 A with 95 % efficiency and full protection
- Product type24 V/12 V to 5 V 3A
- Product colorBlack white
- Product weight0.01 oz
- Converts 8–35 V input to stable 5 V 3 A output
- Over 95 % conversion efficiency keeps heat low
- Over-current, over-temp, reverse-polarity and short-circuit protections built in
- Waterproof, dust-proof, moisture-proof and shock-proof aluminium case
- Compact 34×25×21 mm module with 13–14 cm leads for easy install
What this power adapter does
The KEHIPI 090600AFA steps DC input from 8V to 35V down to a steady 5V at up to 3A. It suits vehicle installs, LED lighting, small motors, media players and similar 5V loads that need a compact buck converter.
15 W headroom and the 22 V input ceiling
Rated at 15 W, it runs cool at typical loads such as navigation units or USB-charged devices. The module will burn if the supply exceeds 22 V, so a 24 V nominal source must be verified below that limit before connection.
Natural cooling with full environmental protection
An aluminium case dissipates heat without a fan, keeping operation silent from -20 °C to 80 °C. The sealed housing adds over-current, over-temperature, reverse-polarity and short-circuit protection plus waterproof, dust-proof and shock-proof ratings.
How it compares
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
- Price $14.99
- Cheaper than about 85% of the 3,875 comparable items (median $23.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | DROK |
| Model name | 090600AFA |
| Part number | 090600AFA |
| Product type | 24 V/12 V to 5 V 3A |
| Product color | Black white |
| Size & build | |
| Product weight | 0.01 oz |
Questions about this item
Will this 8–35 V input range work with the 12 V rail from my older ATX power supply?
Yes, the module accepts DC 8 V to 35 V, so a standard 12 V rail is well within the supported input window.
How can I verify the converter is delivering a steady 5 V 3 A after wiring it up?
Measure the yellow and black output wires with a multimeter under load; you should read 5 V with minimal ripple when drawing up to 3 A.
Does the package include mounting hardware or only the converter board with its 13–14 cm leads?
The box contains one step-down converter with pre-attached input and output cables; screws or brackets for the 4 mm mounting holes are not supplied.
More in AC Adapters & Power Bricks
