KEHIPI Cat8 Ethernet Cable 10FT 26AWG 40Gbps 2000Mhz Gold RJ45

Ready-to-run Cat8 link for home and office

This 10-foot Cat8 patch cable carries 40 Gbps at 2000 MHz bandwidth and terminates in gold-plated RJ45 connectors. The quadruple-shielded 26 AWG construction uses single-strand oxygen-free copper conductors in an F/FTP layout. A UV-resistant PVC jacket makes the cable suitable for direct burial and outdoor exposure as well as indoor routing. It connects routers, switches, consoles, smart-TV boxes, IP cameras, servers and any device with an RJ45 port.

Plug-and-play with rugged outdoor rating

Installation is a simple push of each RJ45 plug into its jack; no tools or configuration are required. The thick 26 AWG solid conductors are stiffer than ultra-thin 32 AWG alternatives, so allow a generous bend radius when routing through tight conduit or around corners. The weatherproof jacket resists sunlight, moisture and temperature extremes, but avoid kinking the cable during burial or when securing with ties. Compatibility extends to Cat7, Cat6, Cat5e and Cat5 equipment, so the link negotiates down automatically where needed.

40 Gbps at 2000 MHz decides the fit

The headline specification is the 2000 MHz bandwidth that enables 40 Gbps throughput over the full 10-foot length. If your switch, router or NIC only negotiates 1 Gbps or 10 Gbps, the cable will still operate reliably but will not increase the link speed beyond the port capability. Buyers who need longer runs beyond 150 feet or who require fibre-optic isolation for electrical noise immunity should choose a different medium.