KEHIPI LM2596 10-pack DC-DC buck converter 3-40V to 1.5-35V 3A power adapter
Pack of ten adjustable buck modules stepping 3 V to 40 V down to 1.5 V–35 V at up to 3 A
- Product color10PCS
- Adjustable 1.5 V to 35 V output from 3 V to 40 V input
- Up to 3 A continuous current with 92 % peak conversion efficiency
- Sanyo solid-state capacitors and 36 µm thick PCB for reliable operation
- Compact 45 × 20 × 14 mm modules, ten pieces per pack
- Operates from -45 °C to +85 °C with LED output indicator
10-pack buck converter modules for prototyping
This pack contains ten LM2596 step-down modules that accept DC input from 3 V to 40 V and provide an adjustable output from 1.5 V to 35 V at up to 3 A. They are suited for hobbyists, repair technicians and small-scale production runs needing multiple identical regulators.
Verify input exceeds output by 1.5 V
Before wiring, confirm your source voltage is at least 1.5 V higher than the desired output because the modules cannot boost. Do not reverse the input and output terminals, and plan to keep continuous load current under 2.5 A or add a heatsink for extended operation.
92 % peak efficiency with non-synchronous
The converters run at 65 kHz switching frequency and use non-synchronous rectification, reaching up to 92 % efficiency. Operating temperature spans -45 °C to +85 °C; load regulation is ±0.5 % and voltage regulation ±2.5 %. An onboard LED indicates output presence.
How it compares
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
- Price $30.99
- Pricier than about 63% of the 3,875 comparable items (median $23.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | AITRIP |
| Model name | LM2596 |
| Part number | LM2596 |
| Product color | 10PCS |
Questions about this item
What comes in the 10-pack and do I need any extra parts to use them?
The pack contains ten LM2596 buck converter modules. Each has a blue potentiometer for voltage adjustment and an onboard LED indicator. You will need a multimeter to set the output voltage and a heatsink if you plan to run above 2.5 A for extended periods.
How do I choose between the input and output voltage ranges for my project?
Feed the module 3.0 V to 40 V DC, keeping the input at least 1.5 V above your desired output. The output can then be dialled from 1.5 V to 35 V using the potentiometer while watching a multimeter.
What does the 3 A maximum current mean when the board is inside my enclosure?
The module can deliver up to 3 A briefly, but the supplier advises staying at or below 2.5 A for continuous operation and adding a heatsink to manage heat in a confined space.
More in AC Adapters & Power Bricks
