KEHIPI USB 3.0 to SATA Adapter 22 pin 40 cm
Connects 2.5" or 3.5" SATA drives via USB 3.0 at 5 Gbps with UASP for up to 70% faster transfers, no enclosure needed
Model USB 3.0 to SATA Adapter with Power Supply
- USB 3.0 to SATA Adapter with Power Supply$15.99
- USB 3.0 to SATA Adapter$11.99
- Access SATA SSD or HDD from any USB computer
- Up to 70% faster transfers with UASP support
- Portable 40 cm cable needs no external power
- Swap 2.5" or 3.5" drives without an enclosure
- Works with SATA drives up to 12TB
USB 3.0 to SATA adapter for 2.5" and 3.5" drives
This cable connects a SATA solid-state or hard drive to a USB 3.0 port on a laptop or desktop. It supports drives up to 12 TB and works with SATA I, II and III devices. The 22-pin connector handles both 2.5" and 3.5" form factors without an enclosure. UASP support raises throughput when the host also implements it.
Suits users who need quick, portable drive access
Technicians cloning disks, recovering data or moving files between bare drives will find the 40 cm cable convenient. It draws power from the USB port, so no external supply is needed for 2.5" units. Builders who require a permanent internal connection or RAID enclosure should look elsewhere.
5 Gbps USB 3.0 link with UASP
The adapter tops out at 5 Gbps and can run up to 70 percent faster than standard USB 3.0 when UASP is active on the host. This single bandwidth figure decides whether the device matches the performance target for a given workflow.
How it compares
Measured against everything we stock in SATA, IDE & M.2 Drive Adapters, at today’s prices. Recalculated every night.
- Price $15.99
- Cheaper than about 77% of the 1,721 comparable items (median $22.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
1 more in the same range
Questions about this item
What does the 5 Gbps USB 3.0 rating mean for actual file transfers?
The adapter reaches up to 5 Gbps when the host also supports UASP, giving up to 70% faster throughput than standard USB 3.0 for large sequential copies.
Does the USB 3.0 interface limit the speed of a modern SATA SSD?
Yes, the USB 3.0 link caps at 5 Gbps, so a SATA III drive that can do 6 Gbps will be bottlenecked by the adapter.
What clearance do I need for the 22-pin connector and 40 cm cable?
The 22-pin plug fits both 2.5" and 3.5" SATA drives directly, and the 40 cm cable keeps the drive close to the laptop or desktop port.
More in SATA, IDE & M.2 Drive Adapters
Similar items
Sabrent EC-SSHD USB 3.0 to 2.5" SATA Hard Drive Adapter
- 4 In
- USB 3.0 to SSD/2.5…
RIITOP M2TPCE16X PCIe 5.0 M.2 NVMe adapter with heatsink
- PCIe
- PCIe 5.0 16x Slot
STARTECH IDE2SAT2 IDE to SATA hard drive adapter 40-Pin PATA to 2.5
- IDE to SATA with OD…
- IDE 40-Pin
Sabrent EC-PCIE NVMe M.2 to PCIe x16/x8/x4 adapter with heatsink
- M.2 (NGFF)
- PCIe x4 via full si…
Bailink SATA to USB 3.0 Adapter BL-USBSATA with 12V 2A Power Supply
- USB to SATA
- External Hard Drive…






