KINGSMAN GAMING SK350 2.5" 512GB SATA internal SSD
- 2.5 in (6.35 cm)
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 2.5" SATA internal SSD with 512GB of 3D NAND storage delivering up to 560 MB/s reads and 530 MB/s writes for faster boot and load times
Model 512GB SK150
The KINGSMAN GAMING SK150 is a 2.5 inch internal solid-state drive with a 512GB capacity. It uses a SATA III interface and 3D NAND memory components. The drive is designed for consumer use as a primary boot device or a secondary storage upgrade.
The standard 2.5 inch form factor fits typical laptop bays and desktop drive cages. SATA data and power connectors are used, so installation requires available SATA ports and cables. With no moving parts, the SSD offers silent operation and greater shock resistance than mechanical hard drives.
Before ordering, verify that your system has an open 2.5 inch drive bay or a compatible mounting bracket. Confirm the motherboard provides a spare SATA III port and that a SATA power connector is available from the power supply. The drive is rated for 300TB written endurance and 1,000,000 hours MTBF.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | AITC KINGSMAN |
| Product line | SK150 |
| Model name | KSSK150S512250 |
| Total capacity | 512 GB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 560 MB/s |
| Sequential write speed | Up to 500 MB/s |
| Storage | |
| NAND flash type | 3D NAND |
| Write endurance | 300 TB |
| Connectivity | |
| Connection protocol | SATA |
| Ports & slots | |
| Interface type | SATA III |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| More details | |
| Mean time between failures | 1,000,000 h |
Other versions of this model
The SATA III link limits this drive to 560 MB/s sequential read and 530 MB/s sequential write, so it will not exceed those figures in practice.
It requires a standard 2.5 inch drive bay or bracket with the usual SATA data and power connectors, matching the 2.5 inch form factor.
Connect the SATA data cable to the motherboard and the SATA power cable from the PSU, then secure the drive; the step often missed is plugging in both cables before closing the case.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?