We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular M.2 2280 SSD circuit board with black controller and NAND chips

KingSpec

KingSpec VP14000 1TB internal SSD

SKU CH-AT99-7X5G8

PCIe 5.0 M.2 2280 drive with sequential reads up to 14349 MBps and writes up to 8957 MBps for AI, gaming and heavy workloads

  • Total capacity1 TB
  • Sequential read speedUp to 14,349 MB/s
  • Sequential write speedUp to 8,957 MB/s
  • Interface typePCI-Express 5.0 x4
  • Form factorM.2 2280
  • Product typeInternal Solid State Drive (SSD)

Capacity 1TB

  • Sequential read up to 14349 MB/s for near-instant load times
  • Sequential write up to 8957 MB/s keeps large-file workflows moving
  • Random read up to 1148000 IOPS for snappy multitasking
  • 600 TBW endurance rating protects heavy workloads
  • PCIe 5.0 x4 interface enables Gen5 platform performance

VP14000 1TB PCIe 5.0 NVMe drive

The KingSpec VP14000 is a 1TB internal SSD in M.2 2280 form factor using 3D TLC NAND. It connects through a PCIe 5.0 x4 interface with NVMe 2.0 protocol. The drive targets AI computing, gaming and heavy-duty workstation workloads where sequential throughput matters.

Sustained workload behaviour

Sequential reads reach 14349 MBps and writes 8957 MBps while random performance hits 1148000 IOPS read and 1038000 IOPS write. An eight-channel controller and optimised firmware maintain these rates during extended AI training, content creation or DirectStorage gaming sessions. The 600TB endurance rating supports long-term heavy use.

Thermals noise and power

A graphene layer provides heat dissipation without a heatsink, keeping temperatures stable under load. Idle power draws 1W and active consumption peaks at 4.4W. The drive operates silently with no moving parts and is rated for 1000000 hours MTBF.

How it compares

Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.

Price $150.99
Cheaper than about 58% of the 1,994 comparable items (median $180.49).
Total capacity 1 TB
Typical for this category: the median of 1,368 items is 1 TB.
Sequential read speed Up to 14,349 MB/s
Higher than about 94% of the 1,180 comparable items (median 2,400 MB/s).
Price per TB $150.99 per TB
Cheaper than about 57% of the 1,362 comparable items (median $165.50 per TB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameKingSpec
Product lineVP Series
Model nameVP14000
Part numberVP14000-1 TB
Total capacity1 TB
Product typeInternal Solid State Drive (SSD)
Intended useConsumer
Performance
Sequential read speedUp to 14,349 MB/s
Sequential write speedUp to 8,957 MB/s
Random read (4K)Up to 1148,000 IOPS
Random write (4K)Up to 1038,000 IOPS
Storage
NAND flash type3D TLC
Write endurance600 TB
Connectivity
Connection protocolNVMe 2.0
Ports & slots
Interface typePCI-Express 5.0 x4
Power
Idle power draw1 W
Active power draw4.4 W
Size & build
Form factorM.2 2280
Heat sinkWithout HeatSink
Overall height2.1 mm
Overall width22 mm
Product depth80 mm
Product weight50g
Environment & compliance
Operating temperature range0 °C to 70 °C
Storage temperature range-40 °C to 85 °C
Operating humidity range5-95%
More details
Mean time between failures1,000,000 h

Other versions of this model

2 more in the same range

Questions about this item

How much power does the VP14000 draw when it runs continuously at full load?

Active power consumption is 4.4W. The drive ships without a heatsink, so the motherboard M.2 slot or an aftermarket cooler must handle the heat generated at that power level.

What motherboard slot and protocol are required to install this 1TB drive?

An M.2 2280 slot wired for PCIe 5.0 x4 with NVMe 2.0 support is needed. The drive is backward compatible with PCIe 4.0 slots, though sequential speeds will be limited by the slower bus.

Will the VP14000 work in a PCIe 4.0 system without firmware changes?

Yes. The drive is backward compatible with PCIe 4.0 platforms. It will operate at PCIe 4.0 speeds automatically; no firmware update is required for the drive itself.

More in Internal NVMe & SATA SSDs

Similar items