XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 60 GB mSATA solid-state drive with 550 MB/s read and 520 MB/s write speeds for notebooks or desktops with an mSATA slot
The Kingston SMS200S3/60G is a 60GB mSATA internal solid-state drive built for notebooks, Ultrabooks and desktops that have an mSATA connector. Its caseless PCB design measures one-eighth the size of a 2.5 inch hard drive and uses a SandForce 2241 controller with a SATA 3.0 interface.
The drive draws 0.4W at idle, 1.2W during typical read operations and 1.8W during typical write operations. With no moving parts it operates silently and is rated for an operating temperature range of 0°C to 70°C, a storage range of -40°C to 85°C and a vibration resistance of 20G.
Sustained sequential read reaches 550MBps and sustained sequential write reaches 520MBps over the SATA 3.0 link. These figures set the practical performance ceiling for boot, application launch and file transfer workloads on this 60GB mSATA SSD.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Kingston |
| Model name | SMS200S3/60G |
| Total capacity | 60 GB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sustained sequential read rate | 550 MB/s |
| Sustained sequential write rate | 520 MB/s |
| Random read (4K) | Up to 86,000 IOPS |
| Random write (4K) | Up to 78,000 IOPS |
| Storage | |
| Controller chip | SandForce |
| Ports & slots | |
| Interface type | Mini-SATA (mSATA) |
| Power | |
| Idle power draw | 0.4 W |
| Active power draw | 1.2 W (TYP) Read 1.8 W (TYP) Write |
| Size & build | |
| Overall width | 30 mm |
| Product depth | 50.88 mm |
| Product weight | 6.86g |
| Shipping weight | 0.02 kg |
| Package size | 81 × 44 × 8 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -40 °C to 85 °C |
| Vibration tolerance | 20G |
| More details | |
| Mean time between failures | 1,000,000 h |
Insert the card into the mSATA slot at an angle, then press it down and secure it with the mounting screw; the step people miss is fastening that screw, which leaves the drive loose and can cause connection loss.
No mechanical maintenance is required; keep the operating temperature between 0°C and 70°C, ensure the OS issues TRIM commands to sustain write performance, and replace the drive only if SMART data reports worn NAND or reallocated sectors.
The 520 MBps sustained sequential write ceiling is reached before thermal throttling, because active write power is 1.8 W and the drive is rated to 70°C operating temperature.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?