Western Digital WDS250G1B0E BLACK SN750 SE NVMe 250GB internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 250GB M.2 2280 internal SSD using 64-layer 3D NAND and a PCI-Express 3.0 x4 interface, delivering sequential reads up to 3100 MB/s and writes up to 1600 MB/s with 200 TBW endurance
This internal solid-state drive uses a PCI-Express 3.0 x4 interface and 64-layer 3D NAND to deliver sequential reads up to 3100 MBps and writes up to 1600 MBps. It is built for consumer PCs that need fast boot and load times in a compact M.2 2280 form factor.
Systems that only support PCIe 2.0 or earlier will not reach the rated speeds. Users who need sustained write performance for heavy workloads should consider drives with higher endurance ratings.
The drive requires an M.2 2280 slot that runs four lanes of PCIe 3.0 to achieve 3100 MBps reads and 1600 MBps writes. Without that link the SSD will fall back to lower throughput.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Western Digital |
| Product line | BLACK SN750 NVMe |
| Model name | WDS250G3 × 0C |
| Total capacity | 250 GB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 3,100 MB/s |
| Sequential write speed | Up to 1,600 MB/s |
| Random read (4K) | Up to 220,000 IOPS |
| Random write (4K) | Up to 180,000 IOPS |
| Storage | |
| NAND flash type | 64-layer 3D NAND |
| Ports & slots | |
| Interface type | PCI-Express 3.0 x4 |
| Size & build | |
| Form factor | M.2 2280 |
| Heat sink | Without HeatSink |
| Overall height | 2.38 mm |
| Overall width | 22 mm |
| Product depth | 80 mm |
| Product weight | 7.5g |
| Shipping weight | 0.05 kg |
| Package size | 127 × 102 × 25 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -55 °C to 85 °C |
| More details | |
| Mean time to failure | 1,750,000 h (Telcordia SR-332, GB, 40 celsius degree) |
Other versions of this model
The drive uses the M.2 2280 form factor, so the motherboard must provide an M-keyed slot that accepts 80 mm modules.
After seating the module at an angle and securing it with the motherboard standoff screw, many builders forget to enable the NVMe option in the BIOS boot-order menu.
The drive is rated for 200 TBW; once that amount of data has been written the NAND may enter read-only mode.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?